

Add to Cart
JYSZ hydraulic diaphragm metering pump
JYSZ hydraulic diaphragm metering pumps are usually provided with
independent parameters of single-unit pumps. Multi-unit pumps with
the same base and specifications or different base and different
specifications can also be manufactured according to user needs.
Multi-unit pumps are suitable for proportional distribution of
multiple media in process flows. The flow rate can be adjusted
steplessly from 0-100% when the pump is turned on (or set).
(According to the characteristics of the metering pump, the minimum
stroke is generally not less than 10% of the total stroke.)
Single-cylinder pumps are suitable for occasions with a single
liquid; combination pumps can be used as proportional pumps or in
parallel; pump combinations can be used as three-proportional pumps
or three pumps can be connected in parallel to achieve a larger
displacement, increase the pulse frequency of the liquid, and
promote continuous and smooth addition of the liquid.
It combines the advantages of both mechanical diaphragm and plunger
metering pumps.
Low noise and durable.
The discharge pressure of one series is higher, up to 500KG.
Quantitative output, the flow rate can be adjusted arbitrarily when
the pump is running or stopped, and the measurement accuracy is
within plus or minus one percent.
Power is transmitted through hydraulic pressure and N-type
crankshaft mechanism, with stable performance.
● Flow range: 0-400 L/H.
● Pressure range: 0-15 MPA.
● Drive system: two-phase, three-phase standard electric or
explosion-proof motor.
● Flow control: manual control or automatic control.
● Pump heads are available in a variety of materials: PVC, PTFE,
304 stainless steel, 316 stainless steel.
Hydraulic diaphragm metering pumps are characterized by no leakage
and high pressure. They are widely used in the transportation of
flammable, explosive, volatile, highly corrosive, radioactive,
highly toxic, suspensions and expensive liquid media; achieving the
purpose of high-pressure liquid filling.
It can deliver corrosive or non-corrosive liquid media with a
temperature of -30℃-100℃ and a viscosity of 0.3-800mm2/s without
solid particles. Different types of metering pumps can be equipped
with variable frequency motors (capable of receiving 4-20mA current
signals) or explosion-proof motors according to user requirements.