1. Properties
DEYI NO MORE NAILS GLUE is characterized with strong adhesion, high
strength. It is flexible, not brittle, unsinkable, fillable, and
paintable, weatherable, water proof. It is also non-toxic, low odor
and eco-friendly, free of toluene and meets the standards of
GB18583.
2. Applications
DEYI NO MORE NAILS GLUE is so high in viscosity that it can
function as nails. Without drilling holes, it can bond timber,
plasterboard, medium-density fiberboard, stone, cement, tile,
metal, plastic, and rubber.
3. Directions
1.The surfaces to be bonded should be clean, free from dust, grease
or oil. 2.Cut an opening in the mouth of the tube, matched with the
attached plastic pipe. Then squeeze the adhesive out with a sealant
Gun.
Method 1 (applicable for light objects and the bonding part bearing
weak force): Coat one part to be bonded with several "zigzag"
patterns at the intervals of 40 cm. Push the part with adhesive
toward the other and then remove it so that there is an opening
between them for the solvent to volatilize. Wait for 2-5 minutes
and then compress the two parts against each other.
Method 2 (applicable for heavy objects): Coat one part to be bonded
with several "zigzag" patterns at the intervals of 40 cm. Clamp or
screw the two parts together until the glue dries (in about 24
hours). Then remove the clamp or the screw. The bonded parts can be
adjusted if necessary in 20 minutes. the initial curing time is 24
hours and the adhesive will work and reaches its best effects in
48hours.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing
placesã
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical
treatment immediately if necessary.
5. Parameters