Main Raw Material Blue Medium Strength N242 Thread Locking Adhesive For Screw And Nut

Factory price 5 minutes epoxy resin/epoxy adhesive ab glue for metal and glass

DY-N550 anaerobic thread sealant flange sealant adhesive

Medium strength Blue N242 thread locking adhesive for screw and nut

High quality 12pcs super glue

DY-N242 is kind of single component adhesive for sealing and locking of screw threads with thixotropic, medium viscosity and medium strength. It will harden doing on two matched metal surface and isolated with air . Easy to remove with hand tools and avoid the leakage and less of screw threads. It is applied on locking and sealing for screw M6-M20 and prevent rusty. The typical usage is locking for nut.

Time for beginning hardening: 10-15 minutes

Package: 10g/tube 20tubes/inner box 200 tubes/big box

50g/tube 10tubes/inner box 120tubes/big box

Dimensions: 54 * 31.5 * 32cm / 37.5 * 33 * 34.5cm

1. Clean the surface of object, keep it clean, dry and without oil.

2. Coat enough glue on the bolt to fill in all engaged screw thread, the working effect will be better if glue line is below 0.055mm.

3. As to the big size screw threads, the bigger gap will influence the bonding speed and strength. It will reduce the frictional force emerged when assembling (Torque tension ration). It should be confirmed does this ration need to lock the screw threads to critical value.

How to use:

1. Clean the surface, keep dry and get rid of the grease, rust. Otherwise, it would effect the solidifying speed a nd intensity. For metal material, remove the oil and rust firstly, then wash the surface with ethyl ester. For non metal, wash the surface with methyl chloroform.

2. Use the cap to cut through the nozzle. Pile out the small quantity glue liquid, drop the glue onto the surface (only lubricate the surface), press and bond the material hardly.

3. The best time to use: at temperature 20~25°C, relative humidity 50%.

Warning:

1. Take precaution against touching by the hands or eyes. If does, wash with dip in the water, do not peel the glue by force. If getting in the eyes, wash with water at once then see the doctor for further steps.

2. The glue has irritant odor. Keep the environment be ventilative and wear glasses to protect the eyes during long term usage.

3. Tighten the lid carefully after applying.

4. Please keep out of the touching by kid.

Storage:

1. The product is nonflammable. Keep dry and out of light, low temperature (20-25°C) during storage. The shelf life is one year.

2. If the glue does not solidifying beyond the shelf life, it could be used still. But the solidifying speed and adhesive intensity would be affected at some degree.

Scope Of Application:

This product could be applied to bond of metal, rubber, plastic, wood, pottery in the fields of daily household repairing, arts making and repairing, apparatus first orienting etc.