Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity
Brand Name:DEYI
Model Number:DY-N271
Payment Terms:T/T
Initial Cure Time:5-10 Minutes
Package:10g/tube; 20tubes/ small box; 200tubes/big box,50g/tube; 12tubes/small box; 120tusbes/ big box,250g/tube; 6tubes/small box; 60tusbes/ big box
Size:54x31.5x32 (cm),62x36.4x18.5 (cm),58x50x19.5 (cm)
Contact Now
Add to Cart
Verified Supplier
Location:
Changsha Hunan China
Address:
No. 518, Group 5 Daming Village Daming Industrial Area of Jinxia Economic Development Zone, Changsha, Hunan, 410005, China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Anaerobic Adhesive Red Glue With Low Viscosity
1. Properties
DY-N271 is a single component anaerobic thread locking &
sealing adhesive with the features of medium viscosity, and high
strength. The product cures in the absence of air between two
fitting metal surfaces to prevent loosening and leakage. It is
applied to the permanent locking and sealing of the threads below
M36, and prevents the rust on threads. It is commonly used for
studs, like cylinders head studs.
2. Applications
- Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
- Spray all threads with enough glue and rotate several times. Allow them to dry. Better effect will be reached at the thickness of 0.05mm.
- The bigger gap will affect cure speed and strength, especially for bigger screw threads.
3. Storage and warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing placesã
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- In the event of mass use, make a pre-test.
- The adhesive is irritable to skin and eyes. Wear gloves while applying glue.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
4. Parameters
Item | Color | Viscosity(CPS/25â) | Filling Gap(mm) | Cure Time(25â/100g) |
DY-N271 | Red | 600-1200 | 0.13 | Touch Dry: 5-10mins |
Full cure: 24hrs |
Failure Moment(N.m) | Remove the torque (N.m) | Heat Resistance(â) | Shelf Life(25â) |
32 | 25 | -60 to +165 | 24 months |
Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity
Inquiry Cart
0