Automotive Start Power Solution Multi-Functional Emergency Start Power Control Board Development PCB Design

Automotive start Power solution Multi-functional emergency start power control board development PCB design
For PCB model customization, the user must upload a compressed package of PCB file (Gerber file is the best type) at the end of the customization For new model customization, the user must upload a compressed package of PCB file (Gerber file is the best type) at the end of the customization page, if there are other board instructions (including but not limited to: PDF, WORD, EXCEL, TXT, JPG, BMP), please also enter the compressed package, so that we can match your board 100%.
Automotive start Power solution Multi-functional emergency start power control board development PCB designSupport 12V automobile emergency start, various brands of mobile phones, PSP, MP3/MP4 PDA, notebook and other products charging/power supply, while having lighting function; Multiple security protection design.
The power supply adopts the combination of imported low-power booster chip and MCU to provide a full range of intelligent protection for products. Support 12V automobile emergency start, various brands of mobile phones, PSP, MP3/MP4 PDA, notebook and other products charging/power supply, while having lighting function; Multiple security protection design.
The power supply adopts the combination of imported low-power booster chip and MCU to provide a full range of intelligent protection for products.

Third, product characteristics
Feature 1: The car starts 20 times in emergency
Feature two: a cold weather start
Feature 3: Strong lighting for 40 hours
Feature four: Flash up to 30 hours
Feature 5: Send SOS signal for 120 hours
Feature 6: The smartphone is charged more than 10 times
Feature 7: Computer power supply for 3 hours
Feature 8: The volume is 1/20 of the old product
Feature nine: The service life is up to 3-5 years
Feature 10: Convenient (home and car charging)
1. After the device is connected to the product, press the switch and supply power immediately; Unplug the cable, automatic sleep within one minute;
2. When charging the product, the five indicator lights cycle shiny, and the five fully bright charging ends;
3, with the power display function, for the external device charging/power supply process, the indicator is displayed, showing 1, the built-in battery power is 20%, display 2, the power is 40%, and so on. When the battery is low, five lights shine;
4, If you need to use the LED lighting function, long press the on key for 5 seconds to start the lighting function, and then short press the on key to switch the lighting state. In order: strong light, flash, SOS, off;
5, when starting the car, the power is at least more than 3 lights.
5. Product parameters
Project Parameter Indicates the project parameter
5V/2A,
Output 12V/2A and input 12V/1A
19 v / 3.5 A
Starting current 200A Peak current 400A
LED flashlight flash /SOS/ long bright temperature protection
5V protection Current 2.5A Short circuit protection Yes
12V protection current 3A 19V protection current 4A
Standby power consumption 100uA Static power consumption 2mA

who we are

Single Sided

Plated Through Hole

Multi-Layer (Up to 40 Layers) including buried and blind Via's

Multi-Layer with bonded heat sinks

Flexible PCB

Flex-Rigid PCB

our advantage

High Temperature (Polyimide)

Microwave (PTFE)

Copper Invar Construction

Special Gold for 'Chip on Board'

Controlled Impedance

Aluminium Clad Technologies

why choose us

Fast/Quick Turn PCB Prototyping

Good quality

DFM simulation