Get Rid Of Grease And Rust Chemical Cleaning Line For Superior Surface Preparation

Before spraying the workpiece, remove all kinds of stains and impurities (such as lubricating oil, emulsion, grease, rust, scale, welding slag, salt-alkali spots, dust, etc.) on the surface of the workpiece to make it clean and stain-free, so as to meet the requirements of powder spraying or painting. This is an essential basic process in the coating production line, which is usually called coating pretreatment. According to the material, size, dimensions, weight and other factors of the workpiece, the choice of chemical treatment (or conversion film treatment) or mechanical processing treatment (such as shot blasting, etc.) is what customers and engineers need to clarify. Different workpieces have different pretreatment methods. However, most of the current pretreatments include degreasing (degreasing), rust removal (for metal workpieces), water washing, coating, (pure) water washing, drying and other basic steps. Engineers need to design various non-standard pretreatment steps and parameters according to customer needs and the characteristics of the workpiece.

Degreasing:

Degreasing is a basic process before coating. The oil, rust, scale, etc. remaining on the surface of the workpiece will seriously hinder the growth of the film, and will also affect the adhesion, drying performance, decorative performance and corrosion resistance of the coating. Only after these foreign matters are completely removed can a high-quality film be formed on the surface of the workpiece to achieve an ideal spraying effect. Degreasing can usually be divided into pre-degreasing and main degreasing steps.

Washing:

After degreasing, certain non-ionic surfactants and degreasing agents are easily attached to the surface of the workpiece. These residual substances need to be washed with water. Water washing can be divided into ordinary water washing and pure water washing. Pure water washing is suitable for workpieces with higher surface cleanliness.

Pretreatment Silane Technology:

Traditional phosphating has been widely used in the pre-treatment process of coating. However, harmful heavy metals such as nickel, zinc, and manganese will be produced in the phosphating process, which is difficult to meet environmental protection requirements, will cause serious pollution to the environment, and will endanger people's health. Therefore, silanization technology has gradually replaced phosphating technology. Silane treatment does not produce harmful substances such as nickel, zinc, and manganese, does not contain phosphorus, does not require heating, has fewer treatment steps, can save the surface adjustment and passivation process, and is simple to maintain. It has become a coating technology that is generally recognized and adopted in the pre-treatment process.

Drying of the film:

After the workpiece is coated, it will enter the drying tunnel to dry the film, which can play two roles. On the one hand, it is to prepare for the next painting process to remove moisture from the surface of the film. On the other hand, it is to further improve the corrosion resistance of the film after painting.

Domestic large-scale coating equipment, intelligent equipment, and environmental protection equipment production enterprises-Zhejiang Huier Coating Environmental Protection Equipment Co., Ltd has 37 years of experience industry team in the powder coating equipment,intelligent equipment and environmental protection equipment.It is the national high and new tech enterprise,Specialized, refined, and innovative small and medium-sized enterprises， scientific and technological SMES 27years specialized R&D, design, manufacture, installation, commissioning ,maintenance of varies coating equipment, automatic equipment, intelligent control system, waste water,waste gas environmental protection equipment and treatment engineering.The company is located in Wukang Street, Deqing County, covers an area of 30,000 square meters, workshop of more than 20,000 square meters, more than 200 employees. The company has passed ISO9001 international system certification, ISO14001 environmental management system certification and ISO45001:2018 Occupational health and safety management system certification, and obtained more than 40 national patents.

The company actively and constantly introduce excellent talents, focus on the development of coating equipment and environmental protection equipment of new technology, new process and new products every year.It is the mission of all staff to continuously develop and grow, meet the needs of customers and create value for customers.

The products are used in all kinds of metal surface, plastic, aerospace, auto parts, mechanical equipment, furniture and other surface treatment.It will meet the customer needs, because it adopts automatic production to anti-corrosion and powder coating the user's products,coating solid bright.

In aerospace, household appliances, light industry, furniture, machine tools, construction, motorcycles, automobiles, communications, aluminum, electric power, agricultural machinery and transportation and other industries by the user's praise. The company continue to innovate, research and development of new products, design and manufacture safety, energy saving, environmental protection, intelligent features of fire-proof safe, powder coating environmental protection equipment and intelligent equipment engineering projects.

The company not only meet the needs of domestic customers, but also in Southeast Asia, the Middle East, Europe, North America, South America and other 27 countries occupied the market has won the favor of customers! The company always dedicated to our customers with the overall intelligent coating environmental protection system solutions and system services.