Plastic and rubber products are widely used in various industries,
from automotive and electronics to consumer goods. The quality and
performance of these products are significantly influenced by
temperature and humidity. To ensure their durability,
functionality, and reliability, it is essential to test them under
controlled environmental conditions. Our budget - friendly constant
temperature humidity chamber for plastic and rubber products is a
cost - effective solution designed to meet the testing needs of
manufacturers, quality control teams, and researchers in these
industries.
We understand the importance of cost - efficiency in the
manufacturing and testing of plastic and rubber products. Our
chamber is designed with a focus on providing high - quality
performance at an affordable price. By using cost - effective
materials and optimized manufacturing processes, we have been able
to keep the initial investment low. Additionally, the chamber is
energy - efficient, resulting in reduced operating costs over time.
This makes it an ideal choice for small and medium - sized
enterprises as well as research institutions with limited budgets.
Despite its budget - friendly nature, the chamber offers precise
control over temperature and humidity. The temperature can be
adjusted within a range suitable for testing plastic and rubber
products, typically from -70°C to 150°C, with a precision of ±1°C.
Humidity levels can be set from 20% to 90% relative humidity (RH),
with an accuracy of ±3% RH. This level of precision ensures that
the products are tested under the exact conditions required,
enabling accurate evaluation of their performance under different
environmental scenarios.
To meet the diverse testing requirements of plastic and rubber
products, the chamber offers a variety of customizable test
programs. Users can create custom - tailored temperature and
humidity profiles, including cyclic changes, step - by - step
variations, and long - term steady - state conditions. For example,
a cyclic test program can simulate the daily temperature and
humidity fluctuations that a plastic or rubber product might
experience in a storage facility or during transportation. Custom -
programmed test sequences can also be designed to mimic specific
real - world conditions, such as exposure to high humidity in a
coastal area or extreme heat in a desert. This flexibility allows
for comprehensive testing and a more in - depth understanding of
how the products will perform in different environments.
The chamber is designed with an interior space that can comfortably
accommodate a reasonable quantity of plastic and rubber products.
Whether it's small - scale testing of individual samples or larger
- scale batch testing, the chamber has enough room to meet the
needs of different users. The interior layout is optimized to
ensure proper air circulation around the products, which is crucial
for maintaining uniform temperature and humidity distribution. This
allows for accurate testing of the products as a whole, without any
significant variations in environmental conditions within the
chamber.
The chamber is equipped with a user - friendly interface that makes
it easy to operate. The control panel features clear displays and
intuitive buttons, allowing users to quickly set and adjust
temperature, humidity, and test programs. Even users with limited
technical knowledge can easily navigate the interface and start
testing their products. The interface also provides real - time
information on the current temperature and humidity levels inside
the chamber, as well as the progress of the test, enabling users to
monitor the testing process with ease.
Built to withstand the rigors of continuous use in a testing
environment, the chamber features a durable construction. The
exterior is made of high - quality, corrosion - resistant metal
that provides protection against physical damage and environmental
factors. The interior is lined with materials that are resistant to
heat, moisture, and chemicals, ensuring a long - lasting and stable
testing environment. The components of the temperature and humidity
control systems are also selected for their durability and
reliability, minimizing the need for frequent maintenance and
repairs.
Safety is a top priority in the design of the chamber. It is
equipped with a range of safety features, including over -
temperature and over - humidity protection. In case of any abnormal
increase in temperature or humidity, the safety system will
automatically shut down the chamber to prevent damage to the
products and the equipment. Additionally, the chamber is equipped
with an emergency stop button for immediate termination of the test
in case of an emergency. These safety features provide peace of
mind to the users and ensure a safe testing environment.
| Model | THC-225 | THC-408 | THC-800 | THC-1000 |
| Inside dimension(W x D x H) mm | 50 x 75 x 60 | 60 x 85 x 80 | 100 x 100 x 80 | 100 x 100 x 100 |
| Outside dimension(W x D x H) mm | 75 x 165 x 170 | 85 x 175 x 190 | 125 x 190 x 190 | 125 x 190 x 210 |
| Internal material | #304 Stainless Steel |
| External material | Powder coated #304 Stainless Steel |
| Temperature range | + 150℃~ - 70 ℃ |
| Humidity range | 5% ~ 98% R. H |
| Temperature resolution ℃ | 0.01 |
| Humidity resolution % R. H. | 0.1 |
| Temperature stability ℃ | ±0.3 |
| Humidity stability % R. H. | ±2 |
| High temperature ℃ | 100 | 100 | 100 | 100 |
| Heating time (min) | 20 | 30 | 30 | 30 |
| Low temperature | 0, -40, -70 | 0, -40, -70 | 0, -40, -70 | 0, -40, -70 |
| Cooling time (min) | 20, 50, 70 | 20, 50, 70 | 20, 50, 70 | 20, 50, 70 |
| Air circulation system | Mechanical convection system |
| Cooling system | Imported compressor, fin evaporator, gas condenser |
| Heating system | Sus304 Stainless steel High-speed heater |
| Humidification system | Steam Generator |
| Humidification water supply | Reservoir, Sensor-controller solenoid valve, recovery-recycle
system |
| Controller | Touch panel |
| Electrical power requirements | Please contact us for requirements of specific models |
| Safety device | Circuit system load protection, compressor load protection, control
system load protection, humidifier load protection, overtemperature
load protection, fault warning light |
By subjecting plastic and rubber products to precise and controlled
temperature and humidity conditions, manufacturers can identify and
address potential quality issues early in the production process.
This allows for the optimization of product design, materials
selection, and manufacturing processes to ensure that the products
perform well under different environmental conditions. The ability
to simulate real - world scenarios helps in improving the
durability, flexibility, and dimensional stability of the products,
resulting in higher - quality plastic and rubber products.
Testing plastic and rubber products in a controlled environment
helps in evaluating their reliability over time. The chamber's
ability to replicate extreme temperature and humidity conditions
allows manufacturers to identify parts of the product that may be
prone to degradation, such as cracking, fading, or loss of
elasticity. By addressing these issues before mass production,
manufacturers can improve the long - term reliability of their
products, reducing the risk of product failures and customer
complaints.
Early detection of potential problems through comprehensive testing
in the chamber can save manufacturers significant costs. By
identifying and fixing issues before mass production, manufacturers
can avoid costly product recalls, warranty claims, and customer
dissatisfaction. The budget - friendly nature of the chamber also
reduces the initial investment and operating costs, making it a
cost - effective solution for quality control and product
development.
The plastic and rubber industries are subject to various
regulations regarding product quality and safety. Our chamber
enables manufacturers to conduct the necessary tests to ensure
compliance with these regulations. By providing accurate and
reliable test data, manufacturers can obtain the required
certifications and approvals, facilitating the sale of their
products in different markets.
For research and development teams in the plastic and rubber
industries, the chamber provides a valuable tool for exploring new
materials and technologies. The ability to precisely control
temperature and humidity allows for in - depth studies of how these
factors affect the properties of new plastic and rubber
formulations. This can lead to the development of innovative
products with improved performance and functionality, giving
companies a competitive edge in the market.
During the development of new plastic and rubber products,
manufacturers use the chamber to test prototypes under different
temperature and humidity conditions. This includes testing the
physical properties of the products, such as hardness, tensile
strength, and elongation, as well as their resistance to
environmental factors. The test results are used to make design
improvements and ensure that the final product meets the desired
quality standards.
In the manufacturing process, the chamber is used for quality
control purposes. A sample of plastic and rubber products from each
production batch is tested in the chamber to ensure that they meet
the specified quality standards. The precise control of temperature
and humidity allows for accurate evaluation of the products'
performance, and any issues can be identified and addressed before
the products are shipped to the market.
To evaluate the long - term durability of plastic and rubber
products, manufacturers conduct aging and durability testing in the
chamber. This involves subjecting the products to extended periods
of high temperature and humidity to simulate the effects of long -
term use and environmental exposure. The test results help in
predicting the lifespan of the products and determining the
appropriate storage and usage conditions.
The chamber can be used to conduct compatibility testing of plastic
and rubber products with other materials or substances. For
example, testing the compatibility of a plastic component with a
chemical used in a manufacturing process or the interaction between
a rubber seal and a liquid it will come into contact with. This
helps in ensuring that the products will function properly when
used in combination with other materials.
Our budget - friendly constant temperature humidity chamber for
plastic and rubber products is an essential tool for the plastic
and rubber industries. With its cost - effective design, precise
temperature and humidity control, customizable test programs,
adequate chamber capacity, user - friendly interface, durable
construction, and safety features, it provides a comprehensive and
reliable platform for testing, evaluating, and improving plastic
and rubber products. Whether it's for product development, quality
control, aging and durability testing, or compatibility testing,
this chamber can meet the diverse needs of the industry. Contact us
today to learn more about how our product can help you ensure the
quality and reliability of your plastic and rubber products.
