

Add to Cart
The liquid water present in all compressed air systems causes
pipeline corrosion, permanent damage to valves, cylinders,
pneumatic tools and machinery, and reduces the efficiency of the
aftercooler/heat exchanger.
By installing the YUKA WS series of high-efficiency gas-water
separators, more than 99% of the liquid water can be removed easily
and economically.
Your compressed air system will reduce downtime and maintenance
costs, so it will operate more efficiently. The WS Air water separator will also improve the efficiency of
downstream equipment such as aftercoolers, refrigeration dryers,
filters, etc., enlarge the equipment life cycle and save costs.
Feature & Advantage
· Protect the coalescing filter from a large amount of liquid
pollution
· Helps to provide air quality, in line with ISO8573-1:2010, the
international standard for compressed air quality
· Suitable for all compressed air applications, suitable for all
compressor types
· Low operating cost, low pressure loss, low life cycle cost
· All WS series gas-water separators are covered by a 15-year shell
warranty
The Water Separator Filter is compact and beautiful in appearance, durable, and the pressure loss is negligible. And there is an imported Automatic Drain Valve inside, no need to replace components. It is not only an ideal component for screw compressors, but also an indispensable water removal device for general air compressor post-processing.
Removal of water in compressed air is the primary task of compressed air purification. The water entrained in compressed air will corrode pipelines, valves, instruments and equipment, resulting in increased production costs.
Scope of Application
1. Separation and recovery of compressed air condensate
2. Condensate separation in steam line
3. Air Separation of inlet/outlet of gas-liquid mixing part
4. Separate and discharge condensate in the vacuum system
5. Condensate separation after water cooling tower
6. Geothermal steam separator
7. Various other gas-liquid separation applications
Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g). For the application in other working pressure, please refer to the correction factors.
Model | Pipe Size | Flow rates | Dimension(mm) | ||||||
L/S | m³/min | cfm | W(Weight) | H(High) | A | B | C (clearance for housing) | ||
TWS009 | RC1/4" | 15.0 | 0.9 | 31.8 | 81 | 197 | 24.6 | 173.9 | 50.5 |
TWS010 | RC3/8" | 25.1 | 1.5 | 53.0 | 81 | 197 | 24.6 | 173.9 | 50.5 |
TWS011 | RC1/2" | 46.8 | 2.8 | 98.8 | 108 | 249 | 30.1 | 220.6 | 53.3 |
TWS012 | RC3/4" | 66.8 | 4.0 | 141.2 | 108 | 249 | 30.1 | 220.6 | 53.3 |
TWS014 | RC3/4" | 86.8 | 5.2 | 183.6 | 108 | 289 | 30.1 | 260.6 | 53.3 |
TWS016 | RC1" | 130.3 | 7.8 | 275.3 | 133 | 332 | 40.7 | 291 | 59.6 |
TWS018 | RC1-1/2" | 175.4 | 10.5 | 370.7 | 133 | 332 | 40.7 | 359.8 | 59.6 |
TWS020 | RC2" | 300.0 | 18.0 | 636.0 | 170 | 617 | 52.92 | 662.97 | 59.6 |
Technical requirements | Maximum operating pressure: 10barg Operating temperature: from 1.5℃ to 80°C |
Pressure | Barg | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
Psig | 15 | 29 | 44 | 59 | 73 | 87 | 100 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 219 | 232 | |
Correction factor | 0.38 | 0.53 | 0.65 | 0.76 | 0.85 | 0.93 | 1.00 | 1.07 | 1.13 | 1.19 | 1.23 | 1.31 | 1.36 | 1.41 | 1.46 | 1.51 |
Compressed Solution Suggest