

Add to Cart
As we know, auto drain play very important part on whole compressed
air system. No matter on the bottom of air receiver, water
separator or air filter.99.73% condensate will be discharge by auto
drain which can save manual operation time and more efficienty.
Product Introduction
>The drain housings are made of first-class aluminium alloy
materials through die-casting technology, strong and tight, surface
is plastic-sprayed, can resist corrosion by synthetic lubricants of
air compressor.
>Easy to install and clean, no noise and compressed air loss,
running safely. Better to clean drain bodies weekly to guarantee
better drainage effect and less blockage.
>Originated from the automatic draining design of the freestyle
float ball, YUKA drains are free from electricity, safe, low
carbon, environment friendly and really help our end users save
costs.
Working Principle
Drains are designed with float ball drain system.
The outlet of the drain will close and stop draining if the
draining buoyance is smaller than the float ball's weight and the
pressure from the compressed air.
It will have a trickle of drainage if the float weight and pressure
are balanced.
It will open and start draining if the draining buoyance is greater
than the float ball's weight and the pressure from the compressed
air. It works cyclically according to the buoyance.
Product Specification
Model No. | Inlet | Outlet | Max.working Pressure | Min.working Temperature | Max.working Temperature | Starting value of Liquid emission | Max.liquid Discharge Capacity | Dimension(mm) | ||
W (width) | D (depth) | H (height) | ||||||||
HAD10B | RC1/2" | Φ6 | 1.0Mpa | 1.5ºC | 85ºC | 22 ml | 84 L/H | 79 | 75 | 112 |
HAD20B | RC1/2" | RC1/2" | 1.0Mpa | 1.5ºC | 85ºC | 72-75ml | 400 L/H | 134 | 108 | 180 |
HAD30B | RC1/2" | RC1/2" | 1.0Mpa | 1.5ºC | 85ºC | 91-93ml | 800 L/H | 172 | 107 | 180 |
Ms. YUKA
Leave a message