

Add to Cart
Masking for a boundary fine line when painting
Suitable for multiple layer paint jobs
Not suitable for application, zinc, lead and lead-based paints,
copper, anodized metals and natural stone (marble, etc.)
Surfaces on which the tape is applied should be dry, free from
dust, oil solvents or other chemicals
Instructions for use and storage:
Keep the tape in a heat and frost free environment. Preferably
between 65 and 70 degrees Fahrenheit at 65% relative humidity
Clean the surface to guarantee optimal attachment of the tape. The
surface has to be dry, without any fat or dust to achieve optimal
adhesion.
Test the tape on a clean surface before use.
Roll down several inches of tape, place it on the surface and press
down firmly. Do not pull the tape out too far to prevent the tape
creeping up or tearing.
For grouting joints with sealing compound, the tape must be removed
before the drying process, otherwise the tape is difficult to
remove.
Check the number of days the tape is removable without residue.
Remove the tape after the drying process at an angle of 45 degrees.
Do this evenly and not too fast. If there are still remnants of
glue, try removing the tape at an angle of 90 degrees
color | yellow | |
index | unit | standard |
Total thickness | um | 125士10 |
Initial adhesion (rolling ball method | 井 | ≥6 |
180° peeling strength | N/25mm | ≥1 |
Tensile strength | N/cm | ≥25 |
Elongation at break | % | ≤5 |
Temperature resistance (stainless steel plate) | / | Room temperature |