200mm 8inch Plastic PPR PVC Pipe Cutter Aluminum Manual Portable Hand Tool

Aluminum Manual Portable Hand Tool 200mm 8inch PVC PPR Plastic Pipe Cutter

Plastic pipe cutter description:
Rotary pipe cutters are not surprising, but they are versatile. When tools such as knives and shovel do not work well, shears can be easily solved. Scissors have become an indispensable tool in people's daily production and life.
Generally, the material of the knife body is made of aluminum alloy, which makes it light and handy. The blade is 65MN, stainless iron, SK5, etc. The hardness is between 48-58 degrees. The blade is quenched at high temperature. Generally, hand tools are consumables between 1 and 3years.

It's Suitable for narrow spaces, the retractable control rod can make better cutting, and it can be adjusted quickly in the working field. The handle is equipped with a replaceable blade, and the cutting is close to the bell mouth. The built-in retractable deburring device is firm and stable.

The hardness is between 48-58 degrees. The blade is quenched at high temperature. Generally, hand tools are consumables between 1 and 3years.

When cutting PVC pipe, it's important to get a clean, straight cut in order to make a strong weld.

We are your correct choice, thanks.

Features:
1. Cutting flexible tube, stainless steel and aluminum tubing.
2. Tuber cutter can remain in the same circle to do roll cutting.
3. Smooth roller has the groove, can stabilize bad bell mouth and cut it easily.
4. Cutter uses the GCr15 material, can accurately and sharp cut pipe fittings.
5. Some cutters equipped with spare blades.
6. Precision feed screw mechanism is enclosed to eliminate clogging and jamming.
7. Tuber cutter stays the same length for use in restricted areas.
8. Swiveled blade deburring tool for removing sharp edges from tubing.
9. Contoured knob holds spare cutter wheel.
10. Rollers are grooved for cutting close to flared end of tubing.
11. Ratchet feed mechanism speeds up cutting operation.
12. Extra wide rollers with flare cut-off groove stabilize tubing.
13. Has spare cutting wheel.

Advantages
1) pipe cutter with special heat treatment for each of our blade we make, gives our blade the perfect hardness for longer usage.

2) Our special girding on our blades makes more shaper (no burrs) and durable. Equally alignment on each of blade makes the straight cut on the pipes.
3) We polish each of our blades carefully to eliminate the liners on the blade surface, which makes the blade more smooth and durable.
4) Strict quality control: we test our blades with latest hi-tech equipment to make sure the hardness of the blade meet our standard.

Attention
When product used in winter, the pipe would be put in the lukewarm water for heating at first to avoid burst because for cold and fragile at cutting. If the edge of cutter appeared wear and tear at using, loose the fixed screw and buy the same type of pipe blade for change after using, we should push down the handle and spread on rustproof oil. Product apply to rigid plastic pipe or aluminum plastic pipe, but not to be applied on electric cable line and steel pipe to avoid to cause cutter damaged seriously.

Note
When cutting hoses/thin tubes with this tube cutter, it is recommended to reserve a length of at least about 40mm on both sides to make the stress points even, so as to avoid inclining the cutting surface or deforming the tube.

What's the rotary pipe cutters?
Rotary pipe cutters are the best manual cutters for ductile iron and a great option for steel pipe. With good leverage from the tool's long handle, pipe snaps off squarely before wheel penetrates halfway through pipe. Rotary pipe cutters have heavy-duty frames.

How to use rotary cutter?
Place the rotary cutter on the pipe. And hand tighten the screw assembly. Make sure it is snug but not tight. Begin by rotating the cutter in the direction of the arrow one revolution around the pipe

FAQ
Q1: Why choose us?
We are a professional manufacturer of pipe hot melt welding machine and pipe scissors.
Q2: Do you provide samples?
Yes, we could offer the sample for free of charge but freight is not included.
Q3: How long is your delivery time?
Generally it’s 3-7days if the goods are in stock, or it’s 25-30days if the goods are not in stock, and it vary a little according to quantity.
Q4: What is your terms of payment?
A: Payment under USD1,000, 100% T/T in advance.
B: Payment more than USD1,000, 30% T/T in advance, balance before shipment.
Q5: What is your packing?
A: usually by carton, and can be packed as your require.

1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Hangzhou Suntech Machinery Co.,Ltd. is a professional manufacturer of pipe tools. We are located in Hangzhou city of China.
From metal pipes to plastic pipes, we offer a wide variety of plumbing tools for on-site working. Our machines have already been exported to many countries and are widely known for its durability and quality. We also offer customization as per the specifications detailed by our clients to fulfill their needs and requirements. We are looking forward to enjoy sincerely cooperation with more and more friends over the world.