EU 3Gang Main Remote Control Light Switch 100-240Vac With Fireproof And Learn Match Code Received Switch

The Code Matching Method involves pairing an RF433 switch with a touch remote control. The process is explained in detail in the accompanying manual. The first step is to wait for a beep, after which the switch button needs to be pressed and held for three seconds. Once this is done, the remote control should be pressed to learn the signal.

The beep sound is an indication that the process is in progress. There are different beep patterns for various functions. For instance, opening or closing the switch produces a single beep. When the switch is turned "on," two beeps will sound, and "off" will produce three beeps. If the user needs to remove the pairing, they should press and hold the switch until there are four beeps before attempting to pair it again.

As a helpful assistant, we provide you with the UBARO service mailbox. In case you have any queries regarding the Code Matching Method, feel free to reach out to us at pingan@ubaro-switch.com . We strive to provide you with prompt and efficient service.

Technical Parameters:

At UBARO, we offer our customers the convenience of our remote switch pairing and battery selection services. In order to pair your main switch with your remote control, simply press and hold the main switch button for five seconds. When you hear a beep, release your finger and press the button on the remote control to control the function of your device.

If at any point you need to clear the data from your device, it's a simple process. Just press and hold the main switch button until you hear four beeps of 'di', 'di', 'di'. Release your finger and all paired data will be cleared.

For the best performance of your UBARO device, we recommend using a 23A 12V alkaline battery. This will ensure that your device is always at its best and functions smoothly.

If you have any issues that need to be resolved, feel free to contact our UBARO service mailbox at Alex@ubaro-switch.com. Our team of professionals is always ready to assist and help you resolve any issues that you may be facing.

Applications:

Switch installation involves the following steps:

1. Turn off the power during installation.
2. Ensure that the "L" position is properly connected to the FireWire.
3. Control the light bulb located at the "L1", "L2", and "L3" positions respectively.
4. Open the cover to complete the final process.

The schematic diagram below illustrates the capacitor installation process:

If you have installed load bulbs such as halogen lamps, LED bulbs, high-voltage strips, smart LED bulbs, or bulbs less than 5W, you need to install the yellow safety capacitor. Additionally, the capacitors should be connected in parallel to control the live and neutral wires.

If you have any issues during the switch installation process, please contact our UBARO service mailbox at pingan@ubaro-switch.com.

Support and Services:

The Wireless Remote Switch product is covered by our comprehensive technical support and services. Our team of experts is available to assist you in troubleshooting any issues you may encounter with the product, and to provide guidance on its installation and use.

We also offer warranty services and product repairs, should the need arise. Our support team is dedicated to ensuring that you have a seamless and satisfactory experience with our product.

In addition, we provide instructional materials and user guides to help you get the most out of your Wireless Remote Switch. These resources are available both online and in print format.

Should you have any questions or concerns about our technical support and services for the Wireless Remote Switch, please do not hesitate to contact us.

Packing and Shipping:

Product Packaging:

• 1 wireless remote switch
• 1 receiver
• 1 user manual

Shipping:

• Shipping weight: 0.3 lbs
• Shipping dimensions: 4 x 2 x 1 inches
• Shipping carrier: UPS
• Expected delivery time: 3-5 business days

Shenzhen Ubero Technology.,Ltd mainly develops and produces switches and sockets of various countries, such as Eu standard, FR standard, UK standard, US standard, Universal standard, etc. touch switch, remote switch, wifi smart switches,zigbee switches,smart sockets; smart gateway, switches and sockets combinations, smart home systems. The product series is very much numerous, and we can provide customers with one-stop purchase and services.

All products have personalized designs and all self-owned mold designs.We have strong capabilities in developing and designing products. Some of our products are not common in the market. We can provide customized designs for customers and OEM services for customers.

The company has obtained international certifications such as CE FCC TUV ROHS CE-RED SAA CB,and has its own brand "UBARO", and has obtained a number of national right certificates. Our products are produced in many countries and regions, and the excellent quality is deeply loved by many countries.