US Stock 4.5KW CNC ATC Automatic Tool Change Spindle Motor BT30 Air Cooled 220V Or 380V
Brand Name:RATTM MOTOR
Certification:CE
Model Number:RTM120x103-30-24Z/4.5
Minimum Order Quantity:1
Delivery Time:3-5 work days
Payment Terms:T/T, Western Union,Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou China
Address:
No. 88 Huashan Road, Xinbei District, Changzhou City
Supplier`s last login times:
within 30 hours
Product Details
Company Profile
Product Details
4.5KW CNC ATC Automatic Tool Change Spindle Motor BT30 Air Cooled 220V For CNC Engraving Machine
Good News: We have warehouse in some countries, check as bellows
| Warehouse location | Shipping Carrier | Delivery Countries | Delivery Time | Advandge |
| Germany&Czech Republic | DHL/GLS | EU Countries | 3-12 Business days | 1. Fast Delivery 2. No VAT Tax |
| United States | UPS/USPS | United States only | 3-12 Business days | 1. Fast Delivery 2. No VAT Tax |
Package include:
1 x 4.5KW BT30 ATC Air Cooled Spindle Motor 220V or 380V ( 24000rpm, 15A,3-phase,800Hz, 4pcs bearing )
2 x Aviation plug
1 x BT30-ER25 Tool Holder with pull stud
1 x 5.5KW Fuling Brand Inverter VFD 220V
English user manual will send by email
I. 4.5KW BT30 ATC Air Cooled Spindle Motor 220V or 380V
Product technical parameter table
| Spindlemodel: | RTM120x103-30-24Z/4.5220V | Voltage: | 220V |
| Maximum speed: | 24000rpm | Rated frequency: | 800Hz |
| Electric current: | 15A | Motorpole: | 4P |
| Rated power: | 4.5KW(S1) | Peak power: | 5.4KW(S6) |
| Rated torque: | 3.5Nm | Peak torque: | 4.2Nm |
Product characteristic curve graph:
Wiring definition:
Power supply, Fhermal, Fan
Proximity switch and push button switch:
Details:
1)This
spindle is built-in type spindle motor, built-in three asynchronous
motors,by the inverter control.As the spindle has a compact
structure,high power, big torque, small vibration, low noise
characteristics,so it can achieve high speed,high powe cutting,high
precision and high stability operation.
2)The
bearing of spindle use grease lubricated angular to contact
bearings,can be achieved lifelong lubricating within the life
cycle.
3)The
spindle use forced coolling mode to coolling motor,front and rear
bearings.Coolant flow through the reasonable arrangement cycle
watercourse of the spindle body,thus can take the heat generated of
the
spindle rotation speed, to achieve thermal equilibrium,let spindle
temperature within a certain constant value. External cooling
device
effect:maintaining a constant temperature of the coolant.
4)The
spindle built-in PTC 140 temperature sensor(Technical parameters
are
visible in other sections of this specification),you can read it
anytime
if you need to protect the motor temperature.
5)The tool clamping methods:this spindle built-in automatic tool change device,shank form is BT30.
| Technicalparameters | ||
| No. | Project | Standard |
| 1 | Spindle blowing dust/seal gas pressure(MPa) | 0.2-0.25 |
| 2 | Spindle gas seal gas flow (L/min) | 65±10(When onWorking) |
| 3 | Cooling water pressure(MPa) | ≧0.25 |
| 4 | Cooling water flow(L/min) | ≧2.5 |
| 5 | Cooling water temperature(℃) | 24-28 |
| 6 | Spindle static state pulse(µm) | ≦3 |
| 7 | Spindle vibration(mm/s) | ≦1.0 |
| 8 | Spindle assembly method | Bottom mounting(6-M8) |
| 9 | Motor windingsPressure test(V/M) | 1000V/1 minute withstanding Voltage test |
| 10 | Tool InterfaceTool Interface | BT30 |
| 11 | Inverter Specifications | 5.5KW(220V) |
| 12 | Fitment | Woodworking machinery, polishing industry, etc. |
5.Spindle installation explanationSpindle installation explanation
1)Fan cooling system description
When
the spindle rotates, the rear fan system must be started to ensure
the
correct supply voltage and the supply voltage is 12V.
2)Air sealing control(AS)
In
order to prevent water or impurities enters internal of the
spindle,spindle will have gas sealing device,the gas seal machine
must
be started start with the machine at the same time.And the need to
go
throughmulti-stage filtration.
3)Compressed gas quality requirements
The quality requirement of gas which is used in gas seals:
Oil content:﹤0.01mg/m³
Solid particle:﹤5µ m
Pressure dew point:﹤7.5℃(0.7MPa)
4)Running-in program instructions
Only
all monitoring issued no failures operational signals,at the same
time,all safety devices have been installed and working
properly,then
allow start spindle.
Note:new
or spindlewhichis not used for a long time must to be running
slowly.First,start run spindle for half an hour as 25% of the
maximum
speed,then increaseto50% of the maximum speed,to run 15
minutes,finally,increase to maximum speed.It’s need to check the
temperature of the spindleduring the wholeprocess,spindle
will get hot, but not hot hand, if the spindle becomes hot, pls
stop
the operation and contact our customer service department.
5)Product backend interface instructions
| No. | Function | Definition |
| 1 | Gassealing(Protection of impurities into the spindle0.2-0.25MPa) | Ф6 |
| 2 | Return air(piston reset 0.35-0.45MPa) | Ф6 |
| 5 | Power supply(Spindle power lines with thermistor) | U/V/W/ Ground wire |
| 6 | Intake air(Spindle loose knife0.5-0.6MPa) | Ф6 |
| 7 | Sensor(spindle tool change signals 24V) | Broach / loose knife |
| 8 | Fan (spindle cooling) | 12V |
6)PTC140Temperature coefficient thermistor parameters
Our products are equipped with a single thermistor PTC140, it can be used for spindle temperature protection.
| Parameter name | Parameter symbol | Single core | Three core Series connection | Unit |
| Maximum DC working temperature | Umax | 30 | 30 | V |
| Rated control temperature | Tk | Designed according to user | ℃ | |
| Rated control temperature tolerance | T1 | ±5℃ | ±5℃ | ℃ |
| Rated control temperature tolerance | T2 | ±0.5℃ | ±0.5℃ | ℃ |
| Resistance value on 25℃ | R25 | ≤100 | ≤300 | Ω |
| Rated control temperature on -5℃resistance value | Tk-5℃ | ≤550 | ≤1600 | Ω |
| Rated control temperature on +5℃resistance value | Tk+5℃ | ≥1330 | ≥4000 | Ω |
| Rated control temperature on +15℃resistance value | Tk+15℃ | ≥4 | ≥12 | KΩ |
| Thermal response time | Ta | ≤5 | ≤5 | S |
| Dielectric strength | Uis | AC2.5 | AC2.5 | KV |
| Maximum control temperature | Tkmax | 180 | 180 | ℃ |
| Maximum allowable storage temperature | Tmax | 180 | 180 | ℃ |
| Minimum allowable storage temperature | Tmin | -40 | -40 | ℃ |
7) ProductTool ChangeSignalsDescription
Sensor Model (0-24V, PNP),The spindle built two sensors.wiring Diagram is as follows:
1. Response broach knife signal, when theknife handleis hang,black sensor output signal;
2. Response loose knife signal, when theknife jawsopen,black sensor output signal;
US Stock 4.5KW CNC ATC Automatic Tool Change Spindle Motor BT30 Air Cooled 220V Or 380V
Inquiry Cart
0