UT Machinery NO Binder Mechanical Biomass Wood Sawdust Extruder for Round Briquettes

UT Machinery No Binder Mechanical Biomass Paper Mobile Wooden Saw Dust Briquette Machine

Wood Material: sawdust; leaves; bamboo; wood branches; waste paper etc.

Agriculture: rice husk; grain steams; surgarcane; bagasse; corn stalk; corn cob; etc.

Fruit Material: peanut shell; coconut shell; coffee husk; etc.

The hydraulic piston presses the material into the closed sleeve until the adjusted pressure is reached (which is usually set up to 80 bars). Then the sleeve opens and finally a stable briquette is produced. The more homogeneous the material, the more uniform results the length of the produced briquettes.

Briquettes are ideal for burning in any fireplace or stove gasifier etc
No binders necessary
Briquette heating value of 15 to 18 MJ/kg. (643 –770 BTU/lb)
Briquette diameter 6.2cm (2.45 inches)
Feed stock moisture range required 8 – 15%

No Binder Wood Sawdust Briquette Machine/ wood Shaves Briquette Machine Requirements of material for Biomass powder sawdust briquette wood fire log making machine:

Ÿ Particle size of Biomass powder sawdust briquette wood fire log making machine

Generally the max particle size is 20x5x3 mm in order to avoid feeding problems for the briquette press.

Ÿ Moisture content of Biomass powder sawdust briquette wood fire log making machine

As the optimum moisture content for briquetting purposes varies with the raw material, we know from experience that the recommended water content is from min. 6% to max. 16%.

From 16% and higher quality will deteriorate considerably until briquetting becomes hard.

Ÿ Wood waste Material

Most wood waste is suitable for briquetting depending on its content of lignin as well as the moisture content and particle size etc.

Ÿ Demolition wood

Different kinds of demolition wood are available in an increasing amount around us and it can be turned into valuable fuel briquettes for private consumers or industrial use.

Ÿ Agricultural waste

Agricultural wastes such as organic wastes typically animal wastes or dead plants, are usually not harmful to the environment; on the contrary, they can enrich the soil with nutrients and minerals.

Alternatively agricultural waste like straw and stalks etc. is also very suitable for production of briquettes.

Ÿ Paper and cardboard

Ÿ Plastic

Ÿ Others

Flow chart:

Compared with screw type briquette press and hydraulic briquetting press, the mechanical stamping press has similar processes with other briquette machines, such as chipping, crushing, drying and packing. However, the mechanical stamping briquette press does have its unique briquetting form. The most remarkable feature of the stamping briquetting press goes quite stable performance.
Raw materials like straw or tree branches shall be crushed into granules with the size of about 20mm (some nut shell can be used directly without pulverization) and moisture content of about 10%-12%, and it will be pushed into briquetting press via a screw feeder. The plunger chip within the briquette press will squeeze and compact raw material together formed into briquette blocks and extruded out of the mould.

Feartures of Mechanical stamping briquette pressing machine:

• Optional mixer for adding moisture to the raw material
• Flexible die system.
• Easy commissioning as factory tested with your raw material
• Easy to relocate.
• Sturdy design - Suitable for running 24hours.
• Easy to service and low maintenance costs

• NO binder needed during production to make clean & green fuel briquette.

• Quantity of heat of final product is 500-1000Kcal higher than raw material.

Specifications of Briquette Machine Cheap Price:

Final products of Mechanical stamping briquette pressing machine :