Customized Galvanized Steel High Toughness 65MN Alloy With Good Ductility

65MN Alloy Is A High-Strength Medium-Carbon Steel With Excellent Toughness And Wear Resistance.

65MN Alloy is a high-strength medium-carbon steel known for its excellent mechanical properties, making it suitable for a variety of demanding applications. This steel grade is designed to offer enhanced strength, toughness, and wear resistance, which makes it ideal for use in automotive, machinery, and structural components.

Chemical Composition:

65MN Alloy contains the following key elements:

• Carbon (C): 0.60-0.70% – The higher carbon content compared to lower carbon steels provides increased strength and hardness while maintaining good ductility and toughness.
• Manganese (Mn): 0.90-1.20% – Manganese improves tensile strength and hardness, enhances the steel's toughness, and helps in deoxidizing the steel during the manufacturing process.
• Silicon (Si): ≤0.35% – Silicon contributes to the steel’s deoxidization and improves its mechanical properties and surface finish.
• Phosphorus (P): ≤0.035% – Low phosphorus content is maintained to avoid brittleness and ensure that the alloy remains tough and ductile.
• Sulfur (S): ≤0.035% – Sulfur is kept low to reduce inclusions and improve machinability and overall material strength.

Mechanical Properties:

65MN Alloy provides a strong set of mechanical properties suitable for a range of applications:

• Tensile Strength: 800-1000 MPa – The high tensile strength makes 65MN Alloy suitable for components that must endure significant pulling or stretching forces.
• Yield Strength: ≥500 MPa – The yield strength indicates the alloy’s capacity to withstand substantial stress without permanent deformation.
• Elongation: ≥12% – The elongation percentage shows good ductility, allowing the material to be deformed and shaped without breaking, which is important for various fabrication processes.
• Density: Approximately 7.85 g/cm³ – Typical for medium-carbon steels, providing a good balance between strength and weight.
• Hardness: HB 200-240 – The hardness range supports good wear resistance and machinability, making it suitable for high-stress applications.

Applications:

65MN Alloy’s enhanced mechanical properties and chemical composition make it suitable for various demanding applications:

• Automotive Parts: Used in the manufacturing of engine components, suspension systems, and gears where high strength and wear resistance are required.
• Machinery Components: Ideal for producing parts such as crankshafts, camshafts, and other components that need to withstand high stresses and wear.
• Structural Elements: Employed in structural applications such as beams, columns, and frames where durability and strength are critical.
• Tools and Dies: Suitable for making tools and dies that require high hardness and resistance to wear, including punches, molds, and cutting tools.
• General Engineering: Used in various engineering applications requiring a balance of strength, toughness, and machinability.

Summary:

65MN Alloy is a high-strength medium-carbon steel that offers a robust combination of tensile strength, toughness, and wear resistance. Its chemical composition and mechanical properties make it well-suited for demanding applications in automotive parts, machinery components, structural elements, and tools. With its high strength and durability, 65MN Alloy provides reliable performance for a wide range of industrial uses.

• stainless steel series 304, 304L, 321, 316L, 317L, 309s, 310s,904L,410, 420, 430, 441, 409, 436, 441, 439, 630,etc.
• Duplex stainless steel series 2205, 2507​,etc.
• HastelloyC-276, B-2, C-2000,etc.
• Nickel-based alloy series Inconel625, 718, Incoloy825, 800H, Monel400,etc.
• Superalloy series GH4169, GH3625,GH3030,GH3044,GH2747,GH3128,GH4145,GH230,GH163, etc.
• Soft magnetic alloy series 1j85, 4J36 4J29 4J33 1J50 1J22 1J85, etc.
• Copper-nickel alloy series NCu40-2-1 plates, tubes, bars, profiles and forgings.

​The company's business philosophy is "integrity, innovation, service, and win-win"
Service commitment: Support spectral inspection, accompanying material list, and product detail list.
Service tenet: Strong strength, high-quality products, low prices, and excellent service.
Quality policy: To stand out with a brand new attitude. Honesty is more precious than jewelry, and trustworthiness is the treasure of the people.
Based on product quality and adhering to the eternal principle of honoring contracts and keeping promises.

All employees of Jiangsu Zhonggong Special Metallurgical Technology Co., Ltd. are full of confidence. The company will pay more attention to talent introduction and technological innovation, always adhere to technological innovation and quality, serve domestic and foreign users, keep pace with the times, and create brilliance together!