RFID Gateway Module Profinet Industrial Communication 5 Pin M12 A Code Connector
Brand Name:KRONZ
Certification:CE
Model Number:KRG60-PN
Minimum Order Quantity:5 pieces
Delivery Time:5-8 working days
Payment Terms:T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou China
Address:
6th Floor, B602 Building, No.10, Rong Jing 2nd Road, Yu Shan Guo Ji, Yong Ning Street, Zeng Cheng District, Guangzhou, P.R.China
Supplier`s last login times:
within 11 hours
Product Details
Company Profile
Product Details
RFID Gateway Module Profinet Industrial Communication 5 Pin M12 A Code Connector
Product Description
1. Advantages:
1>. High protection level and strong corrosion resistance, can
be used in harsh industrial environments
2>. Supports mainstream PLCs , provides mature PLC function
blocks/routines, and supports industrial communications such as
TCP/IP, Modbus TCP , PROFINET, EtherCat and Ethernet/IP
3>. High stability and reliability, 7*24h operation
Characteristics | |
Design | ① Dual network ports, support cascading |
② Supports 6 RFID ports | |
Area of application | Applications in harsh industrial environments require multiple RFID
and need to be connected to the bus network. |
2. Electrical interface
LK1/LK2 Ethernet interface using a 4Pin-M12-DCODED-Female connector, the pin assignment is shown below.
| Connector | Pin | Assignment | Description |
| 1 | TD+ | Tranceive Data+ | |
| 2 | RD+ | Receive Data+ | |
| 3 | TD- | Tranceive Data- | |
| 4 | RD- | Receive Data- |
Pi/Po Power supply interface using a 5Pin-M12-LCODED-Male/Female connector, the pin assignment is shown below.
| Connector(Male) | Pin | Assignment | Description |
| 1 | US (+24V) | System power supply positive | |
| 2 | GNDL (0V) | Load power supply negative | |
| 3 | GNDS (0V) | System power supply negative | |
| 4 | UL (+24V) | Load power supply positive | |
| 5 | PE | Protective earth |
| Connector(Male) | Pin | Assignment | Description |
| 1 | US (+24V) | System power supply positive | |
| 2 | GNDL (0V) | Load power supply negative | |
| 3 | GNDS (0V) | System power supply negative | |
| 4 | UL (+24V) | Load power supply positive | |
| 5 | PE | Protective earth |
RF1~RF6 RFID interface using a 5Pin-M12-ACODED-Female connector, the pin assignment is shown below.
| Connector | Pin | Assignment | Description |
| 1 | US (+24V) | System power supply positive | |
| 2 | A (RS485) | RS485 A | |
| 3 | GNDS (0V) | System power supply negative | |
| 4 | B (RS485) | RS485 A | |
| 5 | NC | Not connected |
4 LED Operating display
The operational statuses of the gateway module are displayed by the
LEDs. The LED
can adopt the colors blue or red and the statuses off, on,
flashing.
The operational statuses can be divided into three categories:
system status, RFID
status, and bus status.
System status | |||
NOTICE: SYS is the system status LED, US is the voltage status LED,
and CS is the key chip status LED. | |||
Name | Color | State | Description |
SYS | Blue Red | Off | The GM is power off. |
Blue LED on | The GM has completed initialization and is operating normally. | ||
Blue LED flashing | The GM is running at default settings. | ||
Red LED on | The GM is in BOOT mode. | ||
Red LED flashing | Software failure. | ||
US | Blue Red | Off | Undefined (not used). |
Blue LED on | All RFID port voltages are normal. | ||
Blue LED flashing | Undefined (not used). | ||
Red LED on | There is an abnormal voltage on a single RFID port. | ||
Red LED flashing | There are abnormal voltages on multiple RFID ports. | ||
CS | Blue Red | Off | Undefined (not used). |
Blue LED on | The key chip is working normally. | ||
Blue LED flashing | The key chip temperature is too high. | ||
Red LED on | The key chip communication abnormality. | ||
Red LED flashing | The key chip initialization abnormality. | ||
RFID Status | |||
NOTICE: RFID has 6 ports ( RF1~RF6 ), and the RFID status is
indicated by two LEDs 0/1 . 0 is equivalent to RUN , the running
status indicator ; 1 is equivalent to ERR, the error status
indicator. | |||
Name | Color | State | Description |
0 (RUN) | Blue | Off | Not enabled. |
On | Communication with the reader is normal. | ||
Flashing | Tags exist in the recognition range. | ||
1 (ERR) | Red | Off | No abnormality |
On | The voltage is too low. | ||
Flashing | Communication abnormality with the reader. | ||
Bus status: Profinet | |||
NOTICE: BS0 is equivalent to SF, system failure indicator; BS1 is
equivalent to BF, bus failure indicator. | |||
Name | Color | State | Description |
BS0 | Red | Off | No error |
Flashing ( 1Hz, 3s ) | DCP signal service is initiated via the bus. | ||
| On | Watchdog timeout; channel, generic or extended diagnosis present;
system error | ||
BS1 | Red | Off | No error |
| On | No configuration; or low speed physical link; or no physical link | ||
Flashing (2Hz) | No data exchange | ||
LK1/2(0) | Blue | Off | The device has no link to the Ethernet. |
On | The device is linked to the Ethernet. | ||
LK1/2(1) | Blue | Off | The device does not send/receive Ethernet frames. |
| Flashing | The device is sending/receiving Ethernet frames. | ||
Technical Data
Electrical data | |
Supply voltage | 18-30VDC |
Current consumption | ＜ 80mA@24V |
Power protection | Overcurrent protection, reverse connection protection, surge
protection, ESD protection, FFT protection |
Power Connector | 5Pin-M12-LCODED- Male (PI) 5Pin-M12-LCODED-female(PO) |
Bus | PROFINET |
Communication | Dual network ports with integrated switching function, compliant
with IEE802.3 standard, 10 / 100M adaptive |
Bus Transmission distance | Cat 5e and above shielded twisted pair,＜100m |
Network Connector | 4Pin-M12-DCODED-M12-Female |
RFID port number | 6 |
RFID communication interface | RS-485 |
RFID port Transmission distance | Shielded twisted pair, < 50m |
RFID connector | 5Pin-M12-ACODED-Female |
Permitted ambient conditions | |
Operation temperature | -30℃~+70℃ |
Storage temperature | -40℃~+85℃ |
Degree of protection | IP67, according to EN 60529 |
Shock resistance | 7M2, 500 m/s2, according to EN 60721-3-7 |
Vibration resistance | 7M2, 200 m/s2, according to EN 60721-3-7 |
Mechanical specifications | |
Housing Material | Aluminum Alloy |
Housing color | Black |
Weight | About 400g |
Dimensions | 167.92x62.92x31.90mm |
Type of mounting | 4 X M6 screws, the length of the screw should be ≥ 20 mm |
Grounding | 1 X M3 screws, Grounding ring inner diameter greater than 3 mm, outer diameter
should be less than 8 mm. |
Standards, specifications, approvals | |
Proof of suitability | CE FCC RoHS WEEE |
RFID Gateway Module Profinet Industrial Communication 5 Pin M12 A Code Connector
Inquiry Cart
0