

Add to Cart
Features:
. DLP technology ≥0.67" DMD chip
. Brightness up to 1200 lumens, contrast 3,000,000:1
· Laser light source life 25000 hours (ECO mode)
. Standard resolution 1920×1200 compatible with 1920×1080, 1280×800, 1024×768
. Dustproof IP6 level
· Support four-corner keystone adjustment
· Supports PIP and PBP display modes
· Support 3D
Support color setting function
RJ-45 interface supports multiple network controls
. ProjectorID combined with RS-232 interface can easily realize
centralized management
· Aviation-grade rigorous test standard 7" 24-hour uninterrupted
work
model | YA-W12 | |
Main parameters | Projection System | DLP projection system |
Chip size | ≥0.67” | |
Standard resolution | 1920×1200 compatible with 1920×1080, 1280×800, 1024×768 | |
Average brightness*1 | 12000lm | |
Uniformity*2 | 90% | |
Contrast*2 | ≥100000:1; (all black/all white) | |
Projection ratio | 16:10 compatible with 16:9, 4:3 | |
Color Wheel | 4-stage (RGBY) high-efficiency speed | |
Light source type | type | Dual color laser (RgBL) |
life | Standard mode: 20,000 hours Energy saving mode: 25,000 hours | |
Projection lens | type | 6 electric lenses: electric shift, electric zoom, electric focus |
Throw Ratio | 0.36-5.5:1 | |
Lens factor | Zoom lens (0.36-5.5 zoom range) | |
Keystone Correction | level | ±20° |
vertical | ±20° | |
Image Processing | The product has built-in multi-point geometric correction function | |
Image Display | Supports PIP and PBP display modes; can display dual digital signals on the same screen; dynamic black function to enhance the black details of dynamic images and mechanical shutter shading design | |
3D | DLP-Link3D, IR3D and graphics card synchronous 3D, support formats: top and bottom, left and right, frame continuous, frame packing (Blu-ray 3D) Note: support full HD special 3D | |
Installation | Ceiling/horizontal placement, front projection/rear projection | |
Input Port | 15-pin Mini-Dsubx1 | |
HDMI 1.4 (supports HDCP *3 )x1 | ||
DVI-D (HDCP compliant *3 )x1 | ||
HDbaseT*4×1 | ||
RS232 (D-sub 9pin) x1 | ||
Wired Remote x1 3.5mm (for wired remote control) | ||
3G-SDI x 1 | ||
3D-Sync In x1 | ||
RJ45×1 (for network control) | ||
miniUSBx1 (for software upgrade) | ||
USB-A x1 | ||
Output Port | 15-pin Mini-Dsubx1 | |
3D-Sync x1 | ||
HDMI 1.4 (supports HDCP *3 ) OUTx1 | ||
3G-SDI×1 | ||
Power specifications | 100-240V AC±10%, 50/60Hz | |
Machine power | Normal mode: 910W | |
Body material | Molded Plastic | |
Standby power | <0.5W | |
Dimensions | 484mm (W) × 519mm (D) × 188mm (H) (excluding lens) | |
weight | 23.75kg (excluding lens) | |
noise | Standard mode: 37dB Energy saving mode: 34dB | |
Work environment*5 | working height | 0m-2500m (use high altitude mode for areas over 1500m) |
working temperature | 5-40℃, not condensed | |
Working humidity | 10%-85% | |
Accessories | AAA alkaline batteries x 2, remote control x 1, power cord x 1, VGA cable x 1, CD-ROM (manual) x 1, quick installation manual, warranty card, A06 lens hood | |
transmission | Supports long-distance transmission up to 100 meters through network cables. The transmission signal supports 3D/2K/4K uncompressed video and is backward compatible. The display screen can be cut and displayed without waiting, and the display quality has no delay and tailing. It also supports All HD audio formats are transmitted. | |
Notes: 1. The light output data value is measured at the center of the projected image. The measurement method is based on the international standard ISO/EC 21118:2012. The data value is the average value. 2. The relevant measurement method and annotation method are based on the IS021118 standard. The data value is the average value. 3. HDCP protocol HDCP (High-bandwidth Digital Content Protection): High-bandwidth digital content protection technology. 4. The HDBaseT trademark is owned by the HDBaseT Alliance. 5. If the projector is used at high altitudes and the ambient temperature exceeds 35°C; the service life of the optical components may be reduced: it is recommended to keep the temperature as low as possible. | ||