

Add to Cart
DECOWELL EX Series Card I/O EX-1050 Gateway Adapter.
Remote IO system consists of network adapter module and extended IO
module.
The network adapter module controls fieldbus communication and it
realizes communication link with host station controller or host
computer software.
The extended IO module controls the connection with the input and
output sensors in the field.
At first the Input IO module collects the field signals and sends
it to the network adapter through the internal bus.
Secondly the controller reads and processing data from the adapter
through the field bus, and it writes the output data into the
network adapter, then the network adapter could write the output
data into the output IO module via the internal bus,so the the
field equipment control could be realized.
According to the communication interface of the controller system,
the network adapter could select the corresponding bus module and
mainstream industrial communication protocols including Modbus,
Profibus-DP, Profinet, EtherCAT,EtherNet/IP, CANsopen, CC-Link,
PowerLink, etc.
Current consumption | 74mA |
Bus protocol | CANopen (DS-301 V4.02, DS-401 V2.1) |
Address setting | 1 to 99 (dial code setting) |
Transmission distance | 1000m (depending on cable and communication rate) |
Transmission rate | 10kbps, 20kbps, 50kbps, 100kbps, 125kbps,250kbps, 500kbps, 1000kbps (dial code setting) |
Overcurrent protection | Support |
Over-voltage protection | Support |
Input/Output Maximum Bytes | 512 bytes/512 bytes |
EX system side power input | 24VDC (18 to 36V) |
EX system side supply current | 2A (Max) |
I/O port side power input | DC24V (± 20%) |
I/O port side output current | 10A (Max) |
Number of expansion I/O modules | 32 |
Protection class | IP20 |
Operating temperature | -10 to 55°C |
Storage temperature | -20~85ºC |