Zinc Coating of 80-275g/m2 and Up To 29m Length Steel Frame Structure Building for Sturdy Construction

Product Description:

Steel is a sturdy material known for its high resistance to shaping at normal temperatures, but this resistance significantly decreases at elevated temperatures. In order to mold the billets, blooms, beam blanks, and slabs obtained from the steelmaking process, they are heated to controlled elevated temperatures for shaping into basic products.

The most commonly used method for shaping steel involves heating it to approximately 1,280°C in a reheat furnace. Subsequently, the steel is rolled by passing it between sets of rolls. These rolls are typically paired either in a horizontal arrangement or in both horizontal and vertical configurations and are contained within a 'stand'.

Features:

Plates are available in a wide range of grades and sizes. For use in building construction, plate will normally be welded into fabricated sections.

Normal plate sizes range from 5mm to 200mm thick, with widths up to 3.5m and lengths up to 18.0m. Plates with a nominal yield strength 275MPa or 355MPa, commonly used in construction, can be supplied in either the As Rolled, Normalised (N) or Normalised Rolled (NR) condition, and are rolled from continuously-cast slab.

Close control of chemical composition is maintained to produce clean steels with consistent strength and toughness properties that meet all relevant national standards, as with all structural products, and state-of-the art levellers produce flat plates with controlled residual stress.

Steel plate is commonly used in many different and demanding applications including:

• Construction
• Earthmoving equipment
• Engineering and machinery
• Mining and quarrying
• Offshore oil, gas and pipelines
• Pressure vessels
• Renewable energy
• Ship building

Technical Parameters:

Pre-engineered buildings are rapidly taking over the construction industry by storm due to its numerous advantages. The structures are sustainable and eco-friendly to the environment. To the uninitiated, pre-engineered buildings (PEB) are steel buildings designed and made by a construction company on the site. The components are either made elsewhere or brought to be assembled.

Steel may be expensive compared to other materials, but it is cost-effective and lasts longer in the long run. Hence, it proves to be affordable material. Many designs are available for the pre-engineered buildings, from the traditional ones to the modern ones customized according to the client’s needs to fit the intended application.

The following are some of the reasons why many people are doing customized pre-engineered steel buildings.

• Visual Appearance: Different clients have varied tastes and preferences. Traditionally made pre-engineered steel building had a similar look to the box. Still, customers customize their structures to look appealing and unique.
• Climate: Different regions have different climates hence the need to do a structure that is adapted to your region. For example, a client based in an area with colossal snowfall may consider putting snow guards to protect the structure, unlike a customer based in areas of extreme temperatures. When doing quotations for the metal buildings, one should consider the weather and climate in the region.

Applications:

The need for services in all types of buildings has seen a significant rise due to evolving approaches to working and living, as well as the integration of low or zero carbon technologies. This increased demand has been further fueled by new regulations and requirements, such as the need for more effective cooling methods, localized temperature control, efficient ventilation, improved heat recovery systems, the implementation of combined heat and power and cooling systems, advanced information technology and communication infrastructure, and the adoption of new renewable energy technologies. These developments have brought about a heightened focus on the optimal placement and distribution of these services within buildings to ensure efficiency and to facilitate future maintenance and adaptability.

Customization:

Product Customization Services for the Metal Construction Building:

Brand Name: KXD Steel Structure

Model Number: KXDSSW-5

Place Of Origin: China

Certification: ISO9001:2008

Minimum Order Quantity: 200 Square Meters

Price: 30-80 USD Per Sqm

Packaging Details: Steel Pallet Or In Bulk

Delivery Time: 35-55 Days

Payment Terms: T/T, L/C, Western Union, MoneyGram

Supply Ability: 15000 Tons Per Month

Standard: Different Standards On Option As Demands

Fire Resistance: Excellent

Purlin: C.Z Shape Steel Channel

Sustainability: Environmentally Friendly

Assembly Time: Fast

Keywords: Prefabricated Steel Building, Metallic Construction Workshop, Metal Building Systems

Support and Services:

Our Metal Construction Building product comes with comprehensive Product Technical Support and Services to assist you throughout the lifecycle of your project. Our team of experts is available to provide guidance on installation, maintenance, and troubleshooting to ensure the optimal performance of your building.