VCPU-1 Single Component Waterproof Coating for Industrial Containers
Brand Name:VICUS-VIDA
Certification:ISO9001
Model Number:VCPU-1
Minimum Order Quantity:20 kg
Delivery Time:within 15 workdays
Payment Terms:T/T, L/C, MoneyGram, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Room 305, No. 9 Building, No. 16299 Puwei Road, Shanghai, China
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
Single Component Waterproof Coating VCPU-1
Introduction
VCPU-1 is a mono-component PU waterproof coating produced by addition
polymerization of poly polyol with isocyanate and supplemented with certain additives and
fillers.
The -NCO end groups in the PU prepolymer react with the moisture in the air and form a
tough, flexible and seamless waterproof membrane on the coating base where the paint is applied to.
Regulatory information
Fully meet the technical requirements of GB19250-2003 PU Waterproof Coating for mono-component
waterproof coating products.
Characteristics
1.Mono-component, available to use when it is opened, easy and quick execution.
2.Strong tensile strength, high extensibility, excellent high and low temperature resistance,Well
adapted to shrinkage, cracking and deformation of coating base.
3.Strong adhesive force, no need of brushing treatment agent on many coating bases which meet
the requirements.
4.Dense film, free from bubbles and holes.
5.Film is formed through chemically react, excellent resistance of long-term water erosion,
corrosion and mildew.
6.Environmentally friendly, no benzene solvent and coal tar ingredients.
7.No need to heat, easy to operate.
Application
1.Kitchen, bathroom,floor, balcony and non-exposed roofs.
2.Basement, including Building basement, underground garage, metro and access in open
cut method.
3.Swimming pools,fountain, ponds and ditches.
4.Top plate at plazas and parking ports
Typical Properties
| Item | Type I by GB | Type II by GB | VCPU-1 | |
| Tensile Strength /MPa ≥ | 1.90 | 2.45 | 3 | |
| Breaking Elongation/% ≥ | 550 | 450 | 1200 | |
Tear Strength/(N/mm) ≥ | 12 | 14 | 16 | |
| Flexibility at Low Temperature /℃ ≤ | -40 | -40,No Cracking | ||
| Water-Tightness 0.3MPa 30min | Impermeable | Impermeable | ||
| Solid Content /% ≥ | 80 | 90 | ||
| Surface Drying Time/h ≤ | 12 | 10 | ||
| Fully Drying Time/h ≤ | 24 | 24 | ||
| Heating Eongation/% | ≤ | 1.0 | 1.0 | |
| ≥ | -4.0 | -4.0 | ||
| Bonding Strength on Moist Surface a/MPa ≥ | 0.50 | 0.50 | ||
| Aging at Certain Elongation | Heating Aging | No Cracking and Deformation | No Cracking and Deformation | |
| Normal Condition | No Cracking and Deformation | No Cracking and Deformation | ||
| Heat Treatment | Retention Rate of Tensile Strength/% | 80~150 | 105 | |
| Breaking Elongation/% ≥ | 500 | 400 | 500 | |
| Flexibility at Low Temperature/℃ ≤ | -35 | -35, No Cracking | ||
| Alkali Treatment | Retention Rate of Tensile Strength/% | 60~150 | 90 | |
| Breaking Elongation/% ≥ | 500 | 400 | 500 | |
| Flexibility at Low temperature /℃≤ | -35 | -35, No Cracking | ||
| Acid Treatment | Retention Rate of Tensile Strength/% | 80~150 | 110 | |
| Breaking Elongation/% ≥ | 500 | 400 | 550 | |
| Flexibility Low Temperature/℃ ≤ | -35 | -35, No Cracking | ||
| Normal Condition | Retention Rate of Tensile Strength/% | 80~150 | 105 | |
| Breaking Elongation/%≥ | 500 | 400 | 500 | |
| Flexibility Low Temperature/℃ ≤ | -35 | -35, No Cracking | ||
| A.Moist surface of underground project only | ||||
| b,Surface that exposed to air only | ||||
| The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints. | ||||
Package: Tinplate Drum
Tare Weight: 1.6kgs/Drum
Net Weight: 20-25kgs/Drum
VCPU-1 Single Component Waterproof Coating for Industrial Containers
Inquiry Cart
0