

Add to Cart
Basic Specification:
DR-E03 (Photocontrol) Parameters | ||
Sensor Type | Photodiode | |
Rated Voltage | 110V~480V AC | |
Reted Frequency | 50/60HZ | |
Working Mode | <10~20 Lux / ON , >30~60Lux / OFF,Time-delay: 2 Seconds | |
Load Current | 16A (220Vac) | |
Ambient Temp | -40℃~105℃ | |
Size | φ80.5mm * φ51.6mm(Height) | |
Case Material | UV resistant PC | |
Shell Design | It Conforms to American National Standard ANSI C136.41-2013 | |
Safety Certification | E510435,Vol 1 , Contact Us For More Informations | |
Life Span | Quality Assurance for 3 Years | |
Applications | Street /Roadway Lighting, Photocontrol Lighting, Parking Lot
Lighting, Garden Lighting, Smart City, Smart Street Light, 5G, Smart Pole |
What are NEMA photocell receptacles
On the top of most street lights or parking lot lights is a blue or black round knob that is actually used as a
lighting control device. The most common lighting control is a dusk to dawn or photocell device. The receptacle
can be used for dusk to dawn sensors, but also for advanced DALI / Bluetooth controls. The 3, 5 and 7 pin standard
are set by NEMA and are standard in the lighting industry across all manufacturers. They are all the same 3 pin twist
lock system so they are easily swapped out. The 5 pin and 7 pin add some additional features.
If you have an outdoor lighting fixture with a receptacle but want to turn it on or off with a switch or
use another control instead of the photocell, there is an easy fix. The sensor can easily be swapped
with a shorting cap or bypass cap outfitted with the same 3 prongs to bypass the sensor.