ASTM A234 WPB-S 180 Degree Elbow SR Carbon Steel Return Bend For Oil And Gas

ASTM A234 WPB-S 180 Degree Elbow SR, Carbon Steel Return Bend For Oil and Gas

What is ASTM A234 WPB-S 180 Degree Short Radius Elbow or Return Bend?

ASTM A234 WPB-S 180 Degree Short Radius Elbow or Return Bend is a type of pipe fitting used in piping systems to change the direction of the pipe by 180 degrees. As the name suggests, it has a short radius and a 180-degree bend. The fitting is made up of ASTM A234 WPB-S material, which is a carbon steel material suitable for high-temperature and high-pressure applications.

This type of fitting is commonly used in industries such as oil and gas, chemical, petrochemical, and power plants. Short-radius elbows are used in applications where there is a need for a tight turn radius, which is beneficial in limited spaces.

These fittings are manufactured to meet the ASTM A234 standard and are available in different sizes and schedules. The fittings are installed by welding them to the adjacent pipes and require proper alignment during installation. ASTM A234 WPB-S 180 Degree Short Radius Elbow or Return Bend provides a smooth flow of the fluid while changing its direction, minimizing the turbulence and pressure drop in the pipeline.

What's the main functions of ASTM A234 WPB-S 180 Degree Return Bend?

The main function of ASTM A234 WPB-S 180 Degree Return Bend is to change the direction of fluid in a pipeline by 180 degrees. It is used in various piping systems to redirect the flow of liquids, gases, and other materials smoothly. Some of the main functions of this fitting are:

1. Changing the direction of fluid flow: The main function of return bends is to change the direction of the fluid without any significant pressure drop, turbulence, or damage to the pipeline.

2. Facilitating smooth flow: Return bends are designed to facilitate a smooth flow of fluid by minimizing turbulence, pressure drop, and other flow disruptions.

3. Connecting different sections of the pipeline: Return bends are used to connect different sections of the pipeline, making a closed and continuous pipeline system.

4. Reducing unwanted stresses: Return bends are used to reduce unwanted stresses and forces in the piping system by providing flexibility and absorbing the vibration.

5. Improving safety and efficiency: Return bends can improve the safety and efficiency of the piping system by avoiding the need for sharp turns, which can cause leaks, blockages, and other malfunctions.

Overall, ASTM A234 WPB-S 180 Degree Return Bend is an essential pipe fitting that enables efficient and safe fluid transportation in various industries.

What's the Chemical Composition and Mechnical Properties of ASTM A234 WPB?

Chemical Composition:
- Carbon (C): Maximum 0.30%
- Manganese (Mn): 0.29-1.06%
- Phosphorus (P): Maximum 0.05%
- Sulfur (S): Maximum 0.058%
- Silicon (Si): 0.10-0.35%
- Chromium (Cr): Maximum 0.40%
- Molybdenum (Mo): Maximum 0.15%
- Nickel (Ni): Maximum 0.40%
- Copper (Cu): Maximum 0.40%
- Vanadium (V): Maximum 0.08%

Mechanical Properties:
- Tensile strength: 60,000-85,000 psi
- Yield strength: 35,000 psi
- Elongation (in 2 inches): 24%

What's the applications of ASTM A234 WPB-S 180 Degree Return Bend?

ASTM A234 WPB-S 180 Degree Return Bend is primarily used in piping systems for changing the direction of the flow. The applications of this fitting include:

1. Oil and gas industry: These return bends are used in pipelines for the transportation of oil and gas.
2. Refining industry: Return bends are extensively used in refineries in various processes, including hydrocracking, hydrotreating, and fluid catalytic cracking (FCC).
3. Chemical industry: These fittings are used in the chemical industry for conveying various liquids, gases, and chemicals.
4. Power plants: Return bends are widely used in power plants for steam and water pipelines.
5. Food industry: Return bends are used in the food industry for the transportation of liquids and gases.
6. Pharmaceutical industry: These fittings are used in the pharmaceutical industry for transporting various drugs and chemicals.
7. Water treatment plants: Return bends are used in water treatment plants for the transportation of water and wastewater.

Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories, the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. The factories already got certificates like : ABS, LR, DNV-GL, BV, KR, CCS, ASME, ISO 9001, ISO14001, ISO18001, ect.

Our factories main products as below :
Factory 1th: Stainless steel seamless tube, Duplex steel seamless tube, Super duplex steel seamless tube, Nickel alloy steel seamless tube;

Factory 2th: Carbon steel seamless tube, Alloy steel seamless tube; Enhanced Heat Tranfer Tube, low fin tube ,U bending workshop;
Factory 3th: High frequency welding fin tube(HFW fin tube, Solid Fin tube, Studded Tube, Serrated Fin tube, Longitudinal welding fin tube), Wound fin tube(L type fin tube, LL type fin tube, KL type fin tube), Embedded G type fin tube , Extruded fin tube, low fin tube, U bend & 180deg. Return;

Yuhong Holding Group also has gained rich experience for project package( products contain:Pipes, Fittings, Flanges, heat exchanger, furnace, fired heater, air cooler, boiler) , YUHONG brand has marked its global presence in more than 85 countries, like, Korea, USA, Canada, Mexico, Colombia, Bolivia, Chile, Argentina, Brazil, Ecuador, Austria, New Zealand, Singapore, Malasyia, Indonesia, Thailand, Vietnam, Ukraine, Turkey,Sauid Arabia, Qatar, U.A.E,Israel,India, UK, France, Italy, Gernmany, Poland, Spain,... We have successfully implemented the orders of Cross Country Pipelines for our valuable customers. In addition, we have also developed a huge network of contacts and strategic alliances with most important manufacturers as stockists around the world.