Customizable Tstn Elastoplastic Polymer Alloy Composites for Self-Lubricating Bearings
Brand Name:INDRON®
Certification:GB/T19001-2016/ISO9001:2015, CHINA CLASSIFICATION SOCIETY
Minimum Order Quantity:1
Delivery Time:15working days
Place of Origin:China
Price:USD, CNY
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Unit 202, 16 Lianpu Street, Huangpu District, Guangzhou, Guangdong, China
Supplier`s last login times:
within 12 hours
Product Details
Company Profile
Product Details
INDRON® TSTN
Elastic-plastic alloy is bonded with long-termed lubricative particles, its turbine guide bearings have excellent performances in self-lubrication and water lubrication, which overcome the problem of large starting torques resulting in the use of rubber turbine guide bearings and can effectively protect the shaft/bearing bushing.
| Property List of INDRON® Elastic-plastic Alloy | TSTN | CFlon | PLAT | hRBR | ||
| Properties | Unit | Test Method | Typical Value | |||
| Physical Property | ||||||
| Density | g/cm3 | GB/T 1033.1 /ISO 1183.1 | 1.16 | 2.05 | 1.23 | 1.1 |
| Mechanical Properties | ||||||
| Tensile Strength | MPa | GB/T 1040.2 /ISO 527.2 | 40.3 | 22.9 | 30 | 20.3 |
| Elongation at Break | % | GB/T 1040.2/ISO 527.2 | 300 | 560 | 150 | 421 |
| Shore Hardness | ° | GB/T 2411/ISO 868 | 62~66D | 68D | 67~76D | 85~95A |
| Water Absorption Mass (Saturated) | % | GB/T 1690/ISO 1817 | 1.2 | 1.2 | 1 | 1.2 |
| Water Absorption Volume (1080h) | % | GB/ T1690/ISO 1817 | 1.4 | 1.4 | 0.9 | 1.7 |
| Charpy Impact Strength (Notched) | kJ/㎡ | GB/T 1043.1/ISO 179.1 | 110 | 100 | 120 | — |
| Compressive Strength | MPa | GB/T 1041/ISO 604 | 24.6 | 28.8 | 38 | 3.8 |
| Modulus Compression | MPa | GB/T 1041/ISO 604 | 423 | 828 | 600 | 60 |
| Compressive Set (24h) | % | GB/T 7759/ISO 815 | 25 | — | — | 13 |
| Maximum Load Capacity (Low-speed oscilating at 25% strain ) | MPa | 26 | 25 | 38 | 5 | |
| Maximum Load Capacity (continuous operation at 25% strain ) | MPa | 10 | 10 | 20 | 3 | |
| Maximum Operation Temperature (in water) | °C | 70 | 100 | 70 | 70 | |
| Maximum Operation Temperature (Dry) | °C | 110 | 260 | 110 | 110 | |
| Tribology Property | ||||||
| Relative Volume Wear (by Rotating Cylinder Drum) | mm3 | GB/T 25262/ISO 23794 | 138 | 200 | 136 | 84 |
| Limiting PV (Seawater Cycling, Linear Speed 5.13m/s) | MPa·m/s | GB 7948-87 | 101.3 | — | — | — |
| Limiting PV (Dry Frition, Linear Speed 5.13m/s) | MPa·m/s | GB 7948-87 | 1.69 | — | 2.3 | 1 |
| Coefficient of Dynamic Friction (Water) | GB 7948-87 | 0.08-0.16 | 0.05-0.15 | 0.08-0.16 | 0.08-0.16 | |
Material Performances
GB/T 9867, ISO 4649 and ASTM D5963 Relative Volume Wears Comparison Among (mm³)
Part of the data is abstracted from Thordon's Product Specifications
ASTM D5963 (Comparison of abrasion) (㎥)
Partial data from THORDON product description
| Graphite | |||||||||||||||||||||||||||||||||||||||||||||||
| RAILKO NF22 | |||||||||||||||||||||||||||||||||||||||||||||||
| ORKOT TLG-P/S | |||||||||||||||||||||||||||||||||||||||||||||||
| ORKOT TXM-M | |||||||||||||||||||||||||||||||||||||||||||||||
| TENMAT T14 | |||||||||||||||||||||||||||||||||||||||||||||||
| TENMAT T814 | |||||||||||||||||||||||||||||||||||||||||||||||
| Polyformaldehyde(POM) DELRIN AF | |||||||||||||||||||||||||||||||||||||||||||||||
| THORDON THORPLAS | |||||||||||||||||||||||||||||||||||||||||||||||
| PTFE | |||||||||||||||||||||||||||||||||||||||||||||||
| INDRON PLAT | |||||||||||||||||||||||||||||||||||||||||||||||
| THORDON HPSXL | |||||||||||||||||||||||||||||||||||||||||||||||
| UHMWHDPE | |||||||||||||||||||||||||||||||||||||||||||||||
| THORDON SXL | |||||||||||||||||||||||||||||||||||||||||||||||
| DIN | |||||||||||||||||||||||||||||||||||||||||||||||
| INDRON TSTN | |||||||||||||||||||||||||||||||||||||||||||||||
| THORDON XL | |||||||||||||||||||||||||||||||||||||||||||||||
| INDRON TITN | |||||||||||||||||||||||||||||||||||||||||||||||
| INDRON HRBR | |||||||||||||||||||||||||||||||||||||||||||||||
| O | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | ||||||||||||||||||||||||||||||||||||||
Under the same conditions, INDRON" elastoplastic alloy has less wear than other common nonmetal bearing materials, and some of its models are even better than imported materials,which means INDRON* bearing has longer service life, higher reliability and lower maintenance cost.
Customizable Tstn Elastoplastic Polymer Alloy Composites for Self-Lubricating Bearings
Inquiry Cart
0