High Temperature Non-Oil Self Lubricating Bushing Material Elastomeric Polymer Alloy
Brand Name:INDRON®
Certification:GB/T19001-2016/ISO9001:2015, CHINA CLASSIFICATION SOCIETY
Minimum Order Quantity:1
Delivery Time:15working days
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Unit 202, 16 Lianpu Street, Huangpu District, Guangzhou, Guangdong, China
Supplier`s last login times:
within 12 hours
Product Details
Company Profile
Product Details
INDRON® hydro bearings can be flexibly assembled into split bearing
with dovetail slat bearing bush, which is convenient for
installation and maintenance without shaft extension, and more
reliable when compared with the interference installation of
cylinder bearing. If necessary during overhaul, the slat bearing
bushes can be conveniently replaced, and a variety of homogeneous
elastoplastic polymer alloy dovetail slat bearing bushes of
different material grades can be mixed or staggered in one bearing,
so that the bearing achieves wear resistance and self-lubricating,
and effectively controls the balance of wobble.
| Material Grade | |||||
| Bearing(lining) | INDRON®TSTN | INDRON®HRBR | INDRON®HAWF | INDRON®UNIV | INDRON®PLAT |
| Material | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers | SyntheticEngineering Elastomers | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers |
| Recommended Workplace | Guide Bearings & Seals | Guide Bearings& Seals | Guide Bearings & Seals | Guide van, connecting rod bushing | Guide vane, connecting rod bushing |
| Temperature Limit | 70℃ | 70℃ | 70℃ | 70℃ | 70℃ |
| Dry Rub | Yes | low speed | low speed | Yes | Yes |
| Acid Resistance | limit | limit | limit | limit | limit |
| Alkaline Resistant | limit | limit | limit | limit | limit |
| Hydrocarbon Suitability | Yes | Yes | Yes | Yes | Yes |
| Abrasion Resistance | good | excellent | excellent | good | good |
| Friction Pair(bushing) | bronze | HRC40 | HRC40 | HRC40 | HRC40 |
| Stainless | recommend | recommend | recommend | recommend | |
| Typical Application | water, sea water | water, sea water | water, sea water | water, sea water | water, sea water |
| Most fluids(pH 5-10) | Most fluids(pH5-10) | Most fluids(pH5-10) | Most fluids(pH 5-10) | Most fluids(pH5-10) | |
| Note | Lowest coefficient of friction,suitable for dry running applications, good wear resistance | Use silt water under moderate grinding conditions | Use ofsilt-containing water under high grinding conditions. Contains abrasion resistant | high load capacity | high load capacity |
What bearing materials are more suitable as the materials used for water pump guide bearings, Babbitt alloy, rubber, ceramics or new polymer materials? It is advisable to take account of the lubrication requirements, use environment and maintenance cycle of the equipment.
COMMON GUIDE BEARING MATERIALS
Bearing type | INDRON bearing | AR bearing | Ceramic bearing | Rubber bearing | Babbitt alloy bearing |
Characteristics | The performance is close thordon, which can use more equipment
assembly methods. In addition to traditional installations by
freezing and pressurizing. It can also be installed by coating
reactive thermal polymerization Dx and cold sticking. | Good wear resistance and impact resistance. The bearing hardness is
high; the shaft sleeve is easy to wear; the temperature difference
changes greatly; there will be the risk of shelling; the price is
high. | Wear-resistant, heat-resistant, corrosion-resistant, lubricated by
pump circulating water, capable of dry grinding for a short time,
high requirement on accuracy in processing and assembly, fragile
and the most expensive. | It has a long history and mature manufacturing process, featured by
wear resistance, anti-seismic, impact resistance, convenient
assembly/disassembly and low price (only 20% of ceramic bearings
price) | Wear resistance and impact resistance require a set of more
complicated sealing and lubricating devices and mechanisms. |
Lubricating requirements | Clean water can be used for lubrication or 150s dry start according
to the material grades. | Dry start more than 180S without clean water lubrication. | It can be lubricated by pumping medium without special clean water
lubrication. | Clean industrial water | Grease lubrication requires a grease supply lubrication system. |
Working temperature | ≤70ºC | ≥273ºC | The bearing itself can withstand the temperature of 1,400ºC | ≤50ºC | ≤65ºC Short time up to 80ºC |
Application site | For pumping stations short of clean water or pumping stations
requiring short-term dry friction, hRBR grade is suitable for water
quality with moderate sediment content. | Pumping stations without clean water or pumping stations requiring
dry friction of more than 180S. | Pumping stations without clean water or pumping stations requiring
short-term dry friction. | Extensive application in any pumping stations with clean water
sources. | The liquid of the pump itself cannot be used for bearing
lubrication in the pumping station. |
Bearing type | INDRON bearing | AR bearing | Ceramic bearing | Rubber bearing | Babbitt alloy bearing |
High Temperature Non-Oil Self Lubricating Bushing Material Elastomeric Polymer Alloy
Inquiry Cart
0