Shaft Seal Standard Oil Deflectors For Rotary Seals In Standard Steam Turbines
Brand Name:INDRON®
Certification:GB/T19001-2016/ISO9001:2015, CHINA CLASSIFICATION SOCIETY
Minimum Order Quantity:1
Delivery Time:15working days
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Unit 202, 16 Lianpu Street, Huangpu District, Guangzhou, Guangdong, China
Supplier`s last login times:
within 12 hours
Product Details
Company Profile
Product Details
Shaft Seal Standard Oil Deflectors for Rotary Seals in Standard Steam Turbines
INDRON® oil and gas sealing material has excellent mechanical properties, good rigidity, toughness, hardness, wear resistance, small permanent compression set, excellent high and low temperature resistance, and excellent aging resistance. It is mainly used to prevent lubricating oil from leaking out or oil mist overflowing in the oil tank.
| Performance | Parameters |
| Density | (1.90~2.00)g/cm³ |
| Shore D Hardness | 67.0~75.0 |
| Glass Transition Temperature | ≥250ºC |
| Tensile Strength | ≥38Mpa |
| Bending Strength | ≥80Mpa |
| Compressive Strength | ≥70Mpa |
| Impact Strength | ≥7.0KJ/m² |
| Coefficent of Friction | 0.12~0.18 |
| Volume Resistivity | ≤50 |
| Material Grade | |||||
| Bearing(lining) | INDRON®TSTN | INDRON®HRBR | INDRON®HAWF | INDRON®UNIV | INDRON®PLAT |
| Material | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers | SyntheticEngineering Elastomers | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers |
| Recommended Workplace | Guide Bearings & Seals | Guide Bearings& Seals | Guide Bearings & Seals | Guide van, connecting rod bushing | Guide vane, connecting rod bushing |
| Temperature Limit | 70℃ | 70℃ | 70℃ | 70℃ | 70℃ |
| Dry Rub | Yes | low speed | low speed | Yes | Yes |
| Acid Resistance | limit | limit | limit | limit | limit |
| Alkaline Resistant | limit | limit | limit | limit | limit |
| Hydrocarbon Suitability | Yes | Yes | Yes | Yes | Yes |
| Abrasion Resistance | good | excellent | excellent | good | good |
| Friction Pair(bushing) | bronze | HRC40 | HRC40 | HRC40 | HRC40 |
| Stainless | recommend | recommend | recommend | recommend | |
| Typical Application | water, sea water | water, sea water | water, sea water | water, sea water | water, sea water |
| Most fluids(pH 5-10) | Most fluids(pH5-10) | Most fluids(pH5-10) | Most fluids(pH 5-10) | Most fluids(pH5-10) | |
| Note | Lowest coefficient of friction,suitable for dry running applications, good wear resistance | Use silt water under moderate grinding conditions | Use ofsilt-containing water under high grinding conditions. Contains abrasion resistant | high load capacity | high load capacity |
Shaft Seal Standard Oil Deflectors For Rotary Seals In Standard Steam Turbines
Inquiry Cart
0