ANSI GB Flange Spring Returned Pneumatic Modulating Control Valve 4-20mA Signal Control Valve

ANSI GB Flange Spring Returned Pneumatic Modulating 4-20mA Signal Control Valve

Product introduction:

A control valve is a power-operated device used to control or alter the flow of fluids like gas, oil, water, and steam. It moves after receiving a signal from a controller, changing the flow. It is a control device used to manage and direct the flow of fluids by changing the size of the flow route. It offers direct control over flow, temperature, pressure, or liquid level. In order to control the flow of fluid, a control valve uses an actuator to adjust the position of the valve plug or disk. These are applied to keep a process variable as close to the target set point as is practical. The components of this valve installation include a valve body, an actuator, a positioner. The body consists of trim components and a bonnet assembly. Its structure supports seating surfaces and a valve closure part while withstanding fluid static pressure and differential pressure, allowing fluid flow, providing pipe-connecting ends, and all of the above. Pneumatic, hydraulic, or electrically powered actuators are the tools that generate the force needed to open and close the valve. To maintain a desired set-point, positioners track and manage real actuator movement.

Pneumatic diaphragm type regulating valve is composed of multi-spring pneumatic actuator and regulating valve body. With the top guide structure, it has the advantages of compact structure, light weight, sensitive action, fluid channel is streamlined S, small pressure drop loss, large valve capacity, accurate flow characteristics, convenient disassembly and assembly. It is widely used to accurately control the process parameters of gas, liquid and other media to keep the pressure, flow rate, temperature and liquid level at the given value. Especially suitable for allowing small leakage and the valve front and rear pressure difference is not large occasions.

Product technical parameter:

Product features:

1. The balanced spool structure, the axial unbalance force is small, the allowed pressure difference is large, the stability is good.

2. The sleeve has strong interchangeability, convenient disassembly and assembly, easy.

3. All-metal spool structure, up to level IV leakage quasi soft seal structure spool to level VI leakage quasi.

4. According to the principle of fluid mechanics, the valve body is designed into an equal section of low flow resistance channel, the inherent adjustable ratio is 50, and the rated flow coefficient is increased by 30%.

5. The actuator adopts multi-spring structure, which can reduce the height by 30%. 30% weight reduction.