500L/H single stage reverse osmosis (RO) water treatment equipment
Pretreatment standard:
Remove impurities such as large suspended particles and grease from
wastewater to create favorable conditions for the subsequent
treatment stage.
Parameter Table
Model | Water Making Ability | Inlet Caliber | Effluent Caliber | Blowdown alCer | Size(mm) | Power |
YSRO-0.5T | 0.5m3/h | DN20 | DN20 | DN15 | 1500×600×1500 | 1.3kw |
YSRO-1T | 1m3/h | DN25 | DN25 | DN20 | 1700×600×1500 | 2.1kw |
YSRO-2T | 2m3/h | DN32 | DN25 | DN20 | 2500×1000×1950 | 4.4kw |
YSRO-3T | 3m3/h | DN40 | DN32 | DN25 | 2500×1200×2150 | 4.5kw |
YSRO-5T | 5m3/h | DN50 | DN40 | DN32 | 2500×1350×2150 | 7.0kw |
YSRO-8T | 8m3/h | DN50 | DN50 | DN40 | 3500×1500×2150 | 11kw |
YSRO-10T | 10m3/h | DN50 | DN50 | DN40 | 3500×1600×2300 | 15kw |
Packaging and transportation
FAQ
1.What are the reasons for the reduced water yield of reverse
osmosis equipment?
The reasons for the reduction of water production of reverse
osmosis equipment may include low feed water temperature, low feed
water pressure, high osmotic pressure caused by high concentration
of water, and membrane pollution. In order to solve these problems,
the feed water temperature and pressure can be correspondingly
increased, the concentration of concentrated water can be reduced,
or the film can be cleaned.
2. What is packing of this machine? Is it suitable for shipment?
Machine will be packed by standard wooden case. It is suitable for
shipment. After you receive machine, you only need to open wooden
case to pick up machine.
3. How does reverse osmosis equipment work?
Reverse osmosis (RO) is a process that uses pressure differences to
facilitate the separation of water from a highly concentrated
aqueous solution (or high-pressure aqueous solution) through a
semi-permeable membrane into a lower concentration aqueous solution
(or low-pressure aqueous solution). In this process, water can
successfully pass through the semi-permeable membrane, and most of
the impurities dissolved in the water such as carbonate, organic
compounds, and bacteria are also blocked, so as to achieve water
purification treatment.
4. Why do seals in reverse osmosis equipment swell?
In reverse osmosis equipment, in order to avoid the use of
petroleum jelly or other petroleum grease lubricants resulting in
cracking of fresh water pipes, special sealing rings are usually
selected. However, some improper lubricants or operations may cause
the sealing rubber ring to expand. Although a slight expansion
usually does not directly affect the operation of the system, it
may hinder the reloading of the system after unloading. The
solution is to avoid using improper lubricants and regularly check
the status of the seal ring.
5.How can I pay you?
After we confirmed order, I will send you sales contract with our
company bank information. You can transfer money to our company
bank account by T/T. Or you can pay via Western Union with credit
card, Smartcard or Visa Card.Or do L/C if it is accepted by both of
us .
If you still don't know how to pay, just call me at+86
18203685329(whatsapp no.)