Smart Lifepo4 Battery Management System YKN-BMS16S 100A / 200A For Energy Storage System

Smart YKN-BMS16S100A/200A With Balanced For Battery Pack (Battery Management System)

PRODUCT FEATURES:

• Data Storage: This function allows for the recording and analysis of battery usage data, which can be useful for performance evaluation and predictive maintenance.

• Charging Current Limiting: Users can flexibly control the charging current, enhancing charging safety.

• Intelligent Heating Film Control: Ensures that the battery can operate normally even in low - temperature environments.

Functions of BMS in Lithium - Battery Systems

1. Safety Protection
   • Overcharge and Over - discharge Prevention: BMS constantly monitors the voltage of lithium - ion cells. When the voltage reaches a pre - set upper limit during charging, the BMS cuts off the charging current, preventing overcharge. Similarly, during discharging, when the voltage drops to a critical lower level, it stops the discharge process to avoid over - discharge. For example, in an electric vehicle, if the battery is overcharged, it can cause the lithium - ion cells to degrade rapidly, and in some cases, lead to a dangerous situation. The BMS ensures that the battery remains within a safe voltage range, protecting both the battery and the user.
   • Overcurrent and Short - Circuit Protection: By monitoring the current flow in the battery circuit, the BMS can detect abnormal current surges. In the event of an overcurrent or short - circuit, it quickly disconnects the circuit, safeguarding the battery from damage. This is crucial in applications where the battery may be subject to sudden electrical faults, such as in industrial equipment powered by lithium - ion batteries.
   • Temperature Monitoring and Control: Lithium batteries perform best within a specific temperature range (usually around 25 - 40°C). The BMS uses temperature sensors to monitor the battery's temperature. If the temperature rises too high, it may activate cooling mechanisms like fans or liquid - cooling systems. Conversely, in cold environments, it can initiate heating elements to bring the battery to an optimal temperature. For instance, in outdoor energy storage systems, which are exposed to various weather conditions, the BMS's temperature management function ensures the battery's stable operation throughout the year.
2. Cell Balancing
   In a lithium - battery pack consisting of multiple cells connected in series or parallel, there are inevitable differences in the capacity and voltage of individual cells due to manufacturing tolerances and usage patterns. Over time, these differences can lead to some cells being overcharged or over - discharged while others are not fully utilized. The BMS addresses this issue through cell - balancing techniques. It can either bleed off the excess charge from the higher - voltage cells or supply additional charge to the lower - voltage cells, ensuring that all cells in the pack have a similar state of charge (SOC). This not only improves the overall capacity utilization of the battery pack but also extends its lifespan. For example, in a large - scale energy storage installation with hundreds of lithium - ion cells, cell balancing by the BMS is essential to maintain the system's efficiency and reliability.
3. State Estimation
   • State of Charge (SOC) Estimation: The BMS calculates the SOC of the lithium battery, which represents the remaining charge in the battery as a percentage. This information is crucial for users to know how much energy is left in the battery, especially in applications like electric vehicles where range anxiety is a concern. By using advanced algorithms that take into account factors such as current, voltage, and temperature, the BMS can provide an accurate estimate of the SOC.
   • State of Health (SOH) Estimation: SOH indicates the overall health and performance degradation of the battery over time. The BMS monitors various parameters related to the battery's performance, such as internal resistance and capacity fade, and uses these data to estimate the SOH. This helps in predicting the battery's remaining useful life and planning for maintenance or replacement in advance.

Q: Do you provide free sample?
A: Yes, a few pcs free sample can be provided, but freight will be charged
Q: what is the warranty?
A: one year
Q: What is your payment term?
A: T/T,L/C
Q: do you accepte OEM order?
A: Yes, you can print yourself logo, also we can provide the design of outlook for your special battery pack
Q: How many cells you can produce per month?
A: 1.8million
Q: What is the mode of transport?
A: usually by sea
Q: Which certificates do you have
A: We have un38.3,MSDS...etc.
Fill out our short form and we will be contacting you shortly to see we how can provide a solution to your needs!

We provide full solution for your battery inquiry.One-stop service from battery design to delivery.

APPLICATION

Our lithium batteries are widely used in home, industrial and commercial energy storage, solar systems, RV(recreational vehicle), forklifts, golf carts, AGVs and small appliances.

MAINLY EXPORTED

Australia, Spain, South Africa, Japan, Germany, Singapore and other countries,.Product quality and service have been widely recognized by customers.