Bearing Parts Single Row Taper Roller Bearings Inner Ring for Low Maintenance in Ring Frames
Brand Name:EASONY
Certification:SGS
Model Number:BIR4032
Minimum Order Quantity:1 Ton
Delivery Time:7-15days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Wuxi Jiangsu China
Address:
RENMING MIDDLE ROAD 139,LIANGXI DISTRICT,WUXI,JIANGSU,CHINA
Supplier`s last login times:
within 38 hours
Product Details
Company Profile
Product Details
Bearing Parts Single Row Taper Roller Bearings Inner Ring
Product:BIR4032 Single row taper bearing ring
Inner rings provide a simple and quick solution for creating a
counterface for radial shaft seals without requiring hardening and
fine machining of the shaft. They can be easily positioned, for
example, over a worn area. Inner rings, when used with radial shaft
seals, form a highly compatible sealing system.
And Deep groove ball bearings mainly bear radial load as well as
take moderate axial load. With less coefficient of friction, high
limiting speed, large size range and variations of structure, deep
groove ball bearings are suitable for precision instruments, low
noise motors, automobiles, motorcycles, air-conditioners, washers,
cleaners and other common machineries as a widely used type of
bearings in machinery industry.
Surface treatment:Plain finish,ZINC plated, color zinc or as your requirement
Standard:ASTM GB DIN JIS EN etc.
Material:Gcr15 SAE52100 100Cr6 SUJ2
specification:Thickness:1mm-150mm
Outside diameter:4mm-914mm
Technology:Cold-drawn,Cold rolling,Hot rolling
Length:Available on request
Delivery time:Generally 7-15 days, depending on customer demand
Surface treatment:Polished, bright, pickling, etc
Application:Used in petroleum, chemical industry, aerospace, paper, automobile, packaging machinery,
decoration, railings and other engineering, hardware processing, ships, power plants and other industries.
| Subjection : Specificationsfor Raw Material of Sleeves (High Carbon - Chromium Bearing Steel Tubes) | |||||||||||
| 1. Specifications for Finish Tubes | |||||||||||
| Material : GCR15/SAE 52100/100CR6/SUJ2 or Its Equivalent | |||||||||||
| Reference: GB/T 18254; YB-T 4146; SKFD33; | |||||||||||
| S13000; JISG4805; ASTMA295; | |||||||||||
| A. Chemical Composition | |||||||||||
| C | Si | Mn | S | P | Cr | Al | O2 | H2 | N2 | Ti (ppm) | |
| (ppm) | (ppm) | (ppm) | |||||||||
| MIN. | 0.95 | 0.15 | - | - | - | 1.3 | - | - | - | ||
| MAX. | 1.1 | 0.35 | 0.5 | 0.025 | 0.025 | 1.6 | 0.05 | 15 | 1 | 100 | 30 |
| B.Microstructure | |||||||||||
| Spherodised Annealed, consist of uniformly distributed spheroidalcarbides in a matrix of ferrite and shall be free from excessive carbidesegregation. | |||||||||||
| C. Macro Etch Test | |||||||||||
| Billet sample taken in accordance with A295 shall be macro-etched and examined. | |||||||||||
| It should be free from pipe, porosity and injurious defects. | |||||||||||
| D. Non Metallic Inclusions : | |||||||||||
| According toA.S.T.M A 295 for through hardening bearing steel the inclusion rating shall beperformed using the recommended ASTM - E 45 Method -D and the rating shall notexceed the limits specified below: | |||||||||||
| A | B | C | D | ||||||||
| Thin | Heavy | Thin | Heavy | Thin | Heavy | Thin | Heavy | ||||
| 2.5 | 1.5 | 2 | 1 | 0.5 | 0.5 | 1 | 1 | ||||
| E. Decarb Layer: | |||||||||||
| Surfacedefects inclusive of decarburized depth not to exceed 0.25mm. | |||||||||||
| Total decarburized depth is defined as distancefrom the surface of decarburized layer to the position where the difference inchemical or physical properties between the decarburized layer & the | |||||||||||
| corematerial is no longer determinable. | |||||||||||
| F. Surface Quality : | |||||||||||
| Noscratch marks & cracks. The tubes shall be well finished and the outside& inside surfaces shall be free from injurious defects for practicaluse.All tubes shall be inspected for ultrasonic tests as per ASTM D213. | |||||||||||
| G. Manufacturing process : | |||||||||||
| Cold Drawn or Cold Pilgered. | |||||||||||
| H. Product Tolerance | |||||||||||
| Sr.No. | OD(mm) | Tube wall thickness | |||||||||
| (mm) | |||||||||||
| 1 | 0 | -0.0/+5% of WT | |||||||||
| I. Other specifications | |||||||||||
| Parameter | Specification | ||||||||||
| Hardness | 220 BHN max | ||||||||||
| Magnetism | Material will be free from magnetism. | ||||||||||
| Straightness | 1 mm per Meter on any running length | ||||||||||
| Length | 5.8m max. | ||||||||||
| Inspection | All tubes will be 100% inspected by PMI test or spark test to ensure to no mix-up of material. | ||||||||||
| Marking | Manufacturer’s mark & name, Grade, size, Heat Number, Year | ||||||||||
| & month of manufacture. | |||||||||||
| Coating | Rust preventive oil on outside & inside surfaces. | ||||||||||
Production Detection:
1. Complete testing facilities
2. Perfect measurement methods
3. Perfect production detection methods
4. Strong QC team,conduct comprehensive quality control
FAQ
Q1:who are we?
A:We are based in WUXI, China, start from 2016,sell to
Asia(60.00%),Western Europe(14.00%),South
America(6.00%).
Q2. how can we guarantee quality?
A:Always a pre-production sample before mass production; Always
final Inspection before shipment.
Q3.what can you buy from us?
A:Copper,Aluminum,Mould steel, Seamless carbon steel,Precision
steel pipe,The steel plate,Alloy steel
Titanium,Custom machine parts.
Q4.why should you buy from us not from other suppliers?
A:Wuxi Easony Machinery Co., Ltd. has 8 years of production
experience. With advanced precision
production equipment and modern large warehouses, has a stockpile of 200,000 tons of goods, has a number
of long-term stable cooperative customers.
Q5.what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,CIF,EXW；Accepted Payment
Currency:USD,EUR,JPY,CAD,AUD,
HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,PayPal;Language
Spoken:English,Chinese.
Q6.Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real
samples,but customers need to pay the freight cost.
Q7.How can we get your price ?
A:We need below information to quote for you:
1)Product Name
2)Standard
3)Material Grade (Chemical Composition)
4)Dimension
5)Quantity
6)The Drawing for Special Parts
Bearing Parts Single Row Taper Roller Bearings Inner Ring for Low Maintenance in Ring Frames
Inquiry Cart
0