DN20 DN15 Thermostatic Mixing Valve for Water Temperature Regulation
Minimum Order Quantity:10
Delivery Time:Peak Season Lead Time: one month Off Season Lead Time: one month
Payment Terms:LC, T/T, D/P, PayPal, Western Union, Small-amount payment
Model NO.:DN15, DN20, DN25
HS Code:8419901000
Supply Ability:5000per Month
Contact Now
Add to Cart
Verified Supplier
Location:
Jiaxing Zhejiang China
Address:
No. 19, Chuangye Road, Huangwan Town, Haining City, Jiaxing, Zhejiang, China 314415
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Constant temperature mixed water valve
Thermostatic Mixing Valve
Working principle
A heat sensor is installed at the water-outlet of the constant temperature mixed water valve, the valve core in the valve body is moved by the temperature sensor to block or open the cold, hot water-inlet. The hot water opening is increased while the cold water opening is decreased, when the temperature adjusting knob sets a certain temperature, the cold, hot water ratio at the water-outlet will be changed as well regardless of the change of the cold water-in or hot-water in temperature, therefore, the constant water-out temperature is ensured.
There are two arrows on the adjusting knob, which point to 30ºC and
55ºC respectively, which means the turning direction for
temperature increasing and reducing. When it is the first time to
set temperature, please adjust from the low temperature to high
temperature to prevent scald. The end of the low temperature
direction is to close hot water, while the end of the high
temperature direction is to close cold water, It is possible to
take bath by closing cold water and using hot water, if the hot
water temperature is not high enough, but it is required to being
adjusted to the low temperature after using to prevent scald when
used next time.
Thermostatic Mixing Valve
Working principle
A heat sensor is installed at the water-outlet of the constant temperature mixed water valve, the valve core in the valve body is moved by the temperature sensor to block or open the cold, hot water-inlet. The hot water opening is increased while the cold water opening is decreased, when the temperature adjusting knob sets a certain temperature, the cold, hot water ratio at the water-outlet will be changed as well regardless of the change of the cold water-in or hot-water in temperature, therefore, the constant water-out temperature is ensured.
| Max. working pressure: | 1Mpa |
| Ideal working pressure: | 0.1-0.6Mpa |
| Hot water temperature: | 50~80ºC |
| Max. water temperature: | 100 ºC |
| Adjusting scope: | 30-55ºC-65ºC |
| Temperature control accuracy: | ±2ºC |
| Coldhot water-in pressure differential: | 8:1 |
| Through-diameter | G1/2"G3/4" |
| Flow: | 1m3/h~20m3/h |
| Position | Min | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Max |
| Temperature(ºC) | - | 30 | 34 | 39 | 43 | 47 | 51 | 55 | - |
DN20 DN15 Thermostatic Mixing Valve for Water Temperature Regulation
Inquiry Cart
0