High Frequency Embossing Ink Stamp PVC Silicone Glue Custom

Description:

A silicone brass mold, also known as a silicone rubber mold, is a type of mold used for making garment labels. It is typically made by casting liquid silicone rubber around a brass master pattern. The brass pattern is created with the desired design and text for the garment label.

Here's a general overview of the process:

1. Design and create the brass master pattern: The desired design and text for the garment label are engraved or etched onto a brass plate. This brass plate will serve as the master pattern for creating the mold.

2. Prepare the mold-making materials: Select a suitable silicone rubber material for making the mold. There are various types of silicone rubber available, such as tin-cure silicone or platinum-cure silicone. Follow the manufacturer's instructions for mixing and preparing the silicone rubber.

3. Apply release agent: To ensure easy removal of the silicone mold from the brass pattern, apply a release agent onto the brass surface. A release agent acts as a barrier between the silicone rubber and the brass, preventing them from bonding.

Quick Detail:

1. It's worth noting that the specific details of the mold-making process may vary depending on the equipment and materials used. It's always recommended to consult the instructions provided by the silicone rubber and release agent manufacturers for the best results.

2. Pour silicone rubber over the brass pattern: Place the brass pattern onto a flat surface, and then pour the mixed silicone rubber over it. Make sure the silicone covers the entire pattern evenly and has enough thickness to create a sturdy mold.

3. Allow the silicone mold to cure: Follow the curing time specified by the silicone rubber manufacturer. The curing process may involve exposing the mold to room temperature, heat, or UV light, depending on the type of silicone used.

4. Demold the silicone mold: Once the silicone has fully cured, carefully remove the mold from the brass pattern. The release agent applied earlier should facilitate easy separation.

5. Trim and clean the mold: Trim any excess silicone and clean the mold to remove any debris or imperfections. This will ensure that the mold produces high-quality garment labels.

6. Use the silicone mold for label production: The silicone mold can now be used for producing garment labels. Pour the desired material, such as liquid PVC, into the mold and allow it to cure. Once cured, remove the labels from the mold, and they are ready to be attached to garments.