

Add to Cart
Chemical Air Water Glass Tube Low Flow Rotameter Plastic Tube Stainless Steel
Description
LZB glass rotor flowmeter is a commonly used instrument used to measure the instantaneous flow of fluids (liquid, gas). It is suitable for measuring the flow rate of transparent fluids, suitable for measuring medium with low pressure and low temperature. It is widely used in chemical, food, environmental protection, metallurgy, machinery, pharmaceutical and other industries as well as scientific research departments to measure single-phase non-pulsating fluids (liquid or gas). ) flow rate, the small-diameter glass rotor is particularly suitable for liquid sampling and gas sampling.
The LZB glass rotor flowmeter is equipped with a float (rotor) that
can move up and down in a vertical transparent cone tube. When the
liquid flows through the cone tube from bottom to top, it is
throttled by the float, creating a differential pressure between
the upstream and downstream of the float. , the float rises under
the action of this differential pressure. When the force that
causes the float to rise is equal to the combined force of gravity,
float and viscosity force, the float is at the equilibrium
position. Therefore, the fluid flow rate flowing through the flow
meter is equal to the rising height of the float, that is, the same
as the height of the flow meter. There is a certain proportional
relationship between the flow areas, and the position and height of
the float can be used as a flow measurement.
They are mainly composed of tapered glass tubes, floats, upper and
lower bases, upper and lower stops, support plates, outer covers,
sealing rings, etc. For flowmeters with a diameter of less than 10
mm, pipe (soft or hard) connections are used and can be equipped
with There is a flow regulating valve. For flowmeters with
diameters above 15 mm, use flange connection (JB78-59 cast iron
flange).
Features
Better-Smart instrument direct supplier
Accuracy / Transparent glass tube can measure small flow rates of
liquids and gases. The water flow rate is small and can measure
0.4-4ml/min.
Wetted materials available / Range ratio A variety of wetted
materials available: aluminum, brass, stainless steel, PP plastic,
PTFE, FEP, etc.
Energy / Small pressure loss No external power supply is required,
and the flow indication is clear and intuitive.
Switch / Simple structure can have alarm switch output.
Anti-corrosion / Measuring range Can measure corrosive fluids
Rich connection forms / Corrosion resistance Various process
connection forms: threads, pagoda joints, ferrules, flanges, etc.
Specification
DN (mm) | Model | Measuring range | Spinal canal length(m) | Accuracy grade | Allow the liquid state to be measured | |||
Water 20℃ | Gas | LZB/LZJ | LZB-()F | Temperature(℃) | Pressure | |||
20℃,10132SPa | (MPa) | |||||||
2 | LZB-2 | 0.4~4ml/min | 6~60ml/min | 160 | 1.5:2.5 | 2.5:4 | -20~+120 | ≤0.4 |
0.6~6ml/min | 10~100ml/min | |||||||
1.0~10ml/min | 16~160ml/min | |||||||
1.6~16ml/min | 25~250ml/min | |||||||
3 | LZB-3 | 2.5~25ml/min | 40~400ml/min | |||||
4~40ml/min | 60~600ml/min | |||||||
6~60ml/min | 100~1000ml/min | |||||||
10~100ml/min | 160~1600ml/min | |||||||
4 | LZB-4 LZB-4F | (1~10)L/h | (16~160)L/h | |||||
(1.6~16)L/h | (25~250)L/h | |||||||
(2.5~25)L/h | (40~400)L/h | |||||||
6 | LZB-6 LZJ-6F | (2.5~25)L/h | (40~400)L/h | |||||
(4~40)L/h | (60~600)L/h | |||||||
(6~60)L/h | (100~1000)L/h | |||||||
10 | LZB-10 LZJ-10F | (6~60)L/h | (100~1000)L/h | 2.5 | ≤0.6 | |||
(10~100)L/h | (160~1600)L/h | |||||||
(16~160)L/h | (250~2500)L/h | |||||||
15 | LZB-15 LZJ-15F | (16~160)L/h | (0.25~2.5)m³/h | 350 | ||||
(25~250)L/h | (0.4~4)m³/h | |||||||
(40~400)L/h | (0.6~6)m³/h | |||||||
25 | LZB-25 LZJ-25F | (40~400)L/h | (1~10)m³/h | |||||
(60~600)L/h | (1.6~16)m³/h | |||||||
(100~1000)L/h | (2.5~25)m³/h | |||||||
40 | LZB-40 LZJ-40F | (160~1600)L/h | (4~40)m³/h | 430 | ||||
(250~2500)L/h | (6~60)m³/h | |||||||
50 | LZB-50 LZJ-50F | (0.4~4)m³/h | (10~100)m³/h | 450 | ||||
(0.6~6)m³/h | (16~160)m³/h | |||||||
80 | LZB-80 LZB-80F | (1~10)m³/h | (50~250)m³/h | 500 | ≤0.4 | |||
(1.6~16)m³/h | 80~400)m³/h | |||||||
100 | LZB-100 LZB-100F | (5~25)m³/h | (120~600)m³/h | |||||
(8~40)m³/h | (200~1000)m³/h |
FAQ
1. Q: What information need to be provided to choose the suitable
model?
A: Application field, Nominal pressure ,Medium & medium
temperture , Power supply , Output,
Flow range, Accuracy, Connection and other parameters.
2. Q: Are you a trade company or a manufacturer?
A: We are an ISO approved manufacturer specialized in level and
flow measuring instruments.
OEM & ODM service are available. Welcome to visit us in China.
3. Q: What is your MOQ?
A: To start our cooperation, sample order is acceptable.
4. Q: What is your delivery date for the Intelligent Mini Micro
Turbine Fuel Oil Diesel Flow Meter?
A: The delivery date is about 3-15 working days after receipt of
payment.
5. Q: What is your payment terms?
A: We support T/T, PayPal ,Western Union.
For mass production order, it is 30% deposit in advance and 70%
balance before shipment.
6. Q: Do you have a warranty for the Flow Meter?
A: Yes, we have the warranty of 12 months.