Battery Powered Metal Tube Rotor Float Flow Meter Can Be Powered For 12-24 Months

How to use (installation)
There are 12 steps required to install the sanitary metal tube rotameter.
1. Clean the welding slag and debris in the pipeline before installing the flow meter;
2. The installation inclination of the upright part of the calibration flowmeter perpendicular to the ground shall not exceed 5°. Otherwise, the measurement accuracy will be affected.
3. Position In order to ensure the measurement accuracy of the flow meter, a straight pipe section of no less than 10xDN should be added to the inlet end of the flow meter, and a straight pipe section of no less than 5xDN should be added to the outlet end. The regulating control valve should be installed at the flow meter during measurement. downstream.
4. Model If the measured medium is a large pulsating flow or two-phase flow, a buffer should be installed upstream of the flow meter to reduce or weaken the pulsation to ensure that the flow of the medium is single-phase stable. At the same time, it is recommended to use a damping type flow meter. .
5. Measuring medium When the measuring medium is dirty or contains magnetically conductive particles, it is recommended to install a filter or magnetic filter upstream of the flow meter.
6. The installation of the support flow meter should be able to properly support the vibration of the pipeline or reduce the axial load of the flow meter. Otherwise, the support of the fixed flow meter should be added.
7. Maintenance In order to facilitate the maintenance and repair of the flow meter, the cleaning of the magnetic filter and the regular maintenance of the user's pipelines, it is recommended to use the bypass pipeline as shown in the figure.
8. Stability When the flow meter is used for gas measurement, it should be ensured that the working pressure in the pipeline is not less than 5 times the pressure loss of the flow meter, so that the flow meter can operate stably and normally.
9. Before using the electric remote transmission and the flow meter with alarm limit switch, open the instrument cover and connect the wires correctly according to the wiring diagram.
10. According to the warning plate on the indicator of the meter, take out the damping piece that prevents the float from vibrating during transportation, and then use the meter after restoring it.
11. If the flow meter is turned on, because there is no pressure in the pipeline or the system has not reached the normal working pressure of the instrument, slowly open the control valve until the system is normal before the instrument can be used. Otherwise, it is easy to cause the pointer to jump or the float to suddenly move. A rose damaged by impact.
12. User use: When the user uses it, if the density of the measured fluid is different from that of water, or the parameters and working status of the measured gas are different from the manufacturer's regulations, the flow meter indication reading should be converted. The conversion method is shown in the appendix.

Features

1. Strong all-metal structure design.
2. Suitable for gas and liquid measurement in various industries.
3. The new case structure design can be used in high temperature environment without adding parts.
4. Specially designed cone measuring tube, wider measuring range, better measuring linearity.
5. Can provide flange, clamp, thread and other process connection methods, suitable for most factory application needs.
6. Measurement part of the material optional: stainless steel, titanium, Hastelloy, PTFE, FEP and other materials.
7. The specially designed magnetic coupling system can significantly improve the measurement accuracy and stability.

Specification

Standard dimensions and weight

Jacket type overall dimensions and weight

Lined FEP type overall dimensions and weight​

Dimensions and weight of top-in and bottom-out type

Side-in and side-out type: overall dimensions, weight and pressure loss

Bottom entry and side exit type: overall dimensions, weight and pressure loss

Horizontal installation type: overall dimensions, weight and pressure loss

FAQ
1. Q: What information need to be provided to choose the suitable model?
A: Application field, Nominal pressure ,Medium & medium temperture , Power supply , Output,
Flow range, Accuracy, Connection and other parameters.
2. Q: Are you a trade company or a manufacturer?
A: We are an ISO approved manufacturer specialized in level and flow measuring instruments.
OEM & ODM service are available. Welcome to visit us in China.
3. Q: What is your MOQ?
A: To start our cooperation, sample order is acceptable.
4. Q: What is your delivery date for the Intelligent Mini Micro Turbine Fuel Oil Diesel Flow Meter?
A: The delivery date is about 3-15 working days after receipt of payment.
5. Q: What is your payment terms?
A: We support T/T, PayPal ,Western Union.
For mass production order, it is 30% deposit in advance and 70% balance before shipment.
6. Q: Do you have a warranty for the Flow Meter?
A: Yes, we have the warranty of 12 months.

Suzhou Beite Smart Instrument Co., Ltd. was established in 2007.It is an automated instrument manufacturer integrating R&D, design, manufacturing, sales and system complete services.

After years of development, the company's new factory covers an area of ​​15 acres, with a workshop area of ​​4000m2. It has complete production and processing equipment. The electronics workshop has a modern SMT assembly line and a complete electronic design laboratory. The machinery workshop has multiple precision CNC lathes, ordinary lathes, CNC milling machines, fully automatic circumferential seam welding machines, drilling machines and other equipment. The calibration workshop has two liquid calibration test lines and one small and medium flow gas calibration test line. Each product has been actually calibrated and verified to ensure product quality.

The company has strict quality control in every aspect from product design, raw material procurement and processing, manufacturing and assembly, testing and inspection to product delivery, striving for zero defect products, and using scientific management, strict technology, sophisticated equipment, to ensure product quality. quality. The company's products, from hardware to software, all have the company's independent intellectual property rights.

The company's products are widely used in municipal administration, petroleum, chemical industry, metallurgy, pharmaceuticals, thermoelectric papermaking, food environmental protection and scientific research fields, and are exported to Southeast Asia, South America, Europe and other countries. Beite's integrity, strength and product quality have been recognized by the industry.

The company's main products include metal tube float (rotor) flowmeters, glass rotor flowmeters, plastic tube flowmeters, turbine flowmeters, thermal gas mass flowmeters, gas turbine flowmeters, intelligent electromagnetic flowmeters, vortex flowmeters, pipeline ultrasonic flowmeters, magnetic flap level meters, ultrasonic level meters, intelligent radar level meters, pressure transmitters, flow totalizers, batch control systems, etc. There are more than a dozen series and hundreds of varieties.