

Add to Cart
>
· The meter test system can measure mechanical meter, electronic mechanical meters and electronic meter by ways of automatic, semi- automatic or manual operation.
· Meters under testing: 1P2W
· Testing mode: active power, reactive power, cross connected reactive power
· With MSVT, can test single-phase meters with closed links between the current and voltage measuring circuits (I-P links)
· With current output switch, can calibrate 2 element meter(optional)
· Simultaneously measure meters with same specifications but different meter constants
· Automatic positioning rotor mark of disc of mechanical meter, with more efficiency.
· Starting test and creeping test
· With the protection function of overload, short voltage circuit and open current circuit.
· The swing together of the scanning heads simplifies the control.
· Aluminum alloy material, light and strong and corrosion resistant
· The testing software with friendly Windows 2000 /XP /7 /8 /10 operation system, includes functional module of all kinds of modern energy meter needed, to reality error test, harmonic test, demand test, influence test etc,.
YC1891D-6 | YC1891D-12 | YC1891D-24 | YC1891D-48 | |
Number of meter positions | 6 | 12 | 24 | 48 |
Accuracy | 0.05 | |||
Power Source | YCS-101-250 | YCS-101-600 | YCS-101-1200 | YCS-101-2500 |
Standard Meter | SZ01A-K3 | |||
MSVT | HJ200GL-6 | HJ200GL-12 | HJ200GL-24 | HJ200GL-48 |
QCD | D5 series | |||
Scanning Head | YCG-2 series | |||
Voltage | ||||
Test voltage output | 24V – 288V or customized | |||
Power of the voltage output | 100VA | 250VA | 500VA | 1000VA |
Resolution | Better than 0.01% of full scale value of range | |||
Setting accuracy | Better than 0.05% at the final range value | |||
Stability | Better than 0.005%/h (integration time 150 s) | |||
Load regulation from 0-max. load | Better than 0.01% | |||
Distortion factor | Better than 0.3% for linear resistance load | |||
Harmonics | 2nd – 21st free programmable | |||
Current | ||||
Test current output | 1mA – 100A or customized,Max.200A | 1mA – 100A | ||
Power of the current output | 150VA | 350VA | 750VA | 1500VA |
Resolution | Better than 0.01% of full scale value of range | |||
Setting accuracy | Better than 0.05% at the final range value | |||
Stability | Better than 0.005%/h (integration time 150 s) | |||
Load regulation from 0-max. load | Better than 0.01% | |||
Distortion factor | Better than 0.3% for linear resistance load | |||
Harmonics | 2nd – 21st free programmable | |||
Phase angle | ||||
Range | 0 -- 360° | |||
Resolution | 0.01° | |||
Setting accuracy | 0.1° | |||
Frequency | ||||
Range | 45Hz – 65Hz | |||
Resolution | 0.01Hz | |||
Error display | ||||
Type of error display | Red LED | |||
Resolution of the error displays | 8 digits | |||
Voltage Supply | 220V±10% or customized 50/60Hz±2Hz | 3x220/380V±10% or customized 50/60Hz±2Hz | ||
Ambient temperature | -10°C -- +40°C | |||
Relative humidity | 35% -- 85% |
>
>1. >Nation-level utility companies
>2. >Governmental bureaus of metrology
>3. >Big energy meter manufacturers
>
>1. >High quality product
>2. >Over 18 months long warranty
>3. >High accuracy class: 0.05
>4. >3~48 Single Phase Electric Energy Meter Test bench
>5. >Extremely high power stability
>6. >Neutral current test(optional)
>7. >Timing error test
>8. >Influence test of voltage, frequency, and harmonic
>9. >Installing RS232, Ethernet communication port in each meter position.
>10. >Tilt impact test (optional)