

Add to Cart
Medical Vials FIlling Machine washing sterlizing filling capping for 2,5,10 ml vials GMP standard
Performance characteristics
♦The vertical ultrasonic washing machine is the most popular
cleaning equipment in the world, with the best cleaning effect and
the best detection effect of visible foreign matters.It has a wide
range of application and a low rate of bottle breaking.In the whole
cleaning process, the water and gas are all used in dependent spray
needles, each spray needle only fixed with one cleaning medium, A
washing and cleaning process isc ompleted to avoid cross
contamination and dead angle,which meets the requirements of the
new GMP.
The tunnel type hot air circulation sterilization oven adopts the laminar flow principle and hot air high-speed sterilization process, which can make the container complete the whole production process of preheating, drying and sterilization, cooling to the bottle out under the condition of Class-Alaminar flow in the sealed tunnel. It is the most popular drying and sterilization equipment with the best sterilization effect in the world atpresent, with uniform heat distribution, good pyrogen removal effect, and equipped with mesh belt ultrasonic on-line cleaning, power-off protection and air pressure automatic regulation system.
Vial Fillling Machine Spec:
Model | LYQCL80+LYASMR620/48+LYKGF8 | LYQCL1000+LYASMR620/48+LYKGF10 | LYQCL120+LYASMR620/55+LYKGF12 |
Adaptive Spec | 2-30ml national standard vials | 2-30ml national standard vials | 2-30ml national standard vials |
Capacity | 6000-12000pcs/hr | 6000-18000pcs/hr | 6000-26000pcs/hr |
Clarity | >99% | ||
Breakage rate | <0.5% | ||
Filling Torlerance | 0.5% - 2% | ||
Fresh Water consumption | 0.2-0.4Mpa/0.6-1.0 m3/hr | ||
Clean compressed air consumption and pressure | 0.3-0.6Mpa/35-80 m3/hr | ||
Pass rate of stopping | more than 99% | ||
Pass rate of capping | more than 99% | ||
vacuum pumping speed | 60m3/h(external distribution) | ||
Exhuast volume | 3500-4800m3/h | ||
Weight | 9000 KGs | ||
Total Power | about 90kw 380v 50Hz | about 93kw 380v 50Hz | about 110kw 380v 50Hz |
Size | about 12600 X 2260 X 2445mm | about 12600 X 2260 X 2445mm | about 13200 X 2260 X 2445mm |
The filling and stoppering machine adopts a positive table design structure, and can automatically complete the separation and delivery of the bottle by means of the transfer and delivery of the disksynchronous belt. It is the most popular and the most stable filling and stoppering equipment in the world at present.
The capping machine adopts the principle of small knife side
follow-up rolling capping. The blade can be slightly adjusted in
the up and down, and the circumference direction. It is more
suitable for domestic packaging materials, and has good
adaptability and smooth
rolling mouth without damage.
♦The whole vial filling machine adopts advanced intelligent
electronic control technology, simpleand intuitivehuman-machine
interface, realizes the mechanical and electric alintegration
design, can be front and back linkage control and single machine
operation, ensures the normal operation of the whole line, and can
display the machine operation status and fault display, fault self
diagnosis, fault analysis and trouble shooting methods, so that the
whole production process can achieve automatic control.
We are qualified to provide the following services:
Accompanying production services. is acharacteristic service that Lingyao can provide to support our clients: