

Add to Cart
Electric Parameter | ||||||||||||
PCM Specifications For 3.7V(1S)Li-ion Battery Packs | ||||||||||||
Model:JW-B1S10A-359 | ||||||||||||
NO. | Project | Min. | Typ. | Max. | Unit | |||||||
1 | voltage | Charging voltage | 4.2 | V | ||||||||
Balance voltage for single cell | / | / | / | V | ||||||||
2 | Current | Balance current for single cell | / | mA | ||||||||
Current consumption | 15 | uA | ||||||||||
Maximal continuous charging current | 10 | A | ||||||||||
Maximal continuous discharging current | 10 | A | ||||||||||
3 | Over charge protection | Overcharge detection voltage for single cell | 4.300 | 4.325 | 4.350 | A | ||||||
Overcharge detection delay time | 0.7 | 1.3 | S | |||||||||
Overcharge release voltage for single cell | 4.00 | 4.05 | 4.10 | V | ||||||||
4 | Over discharge protection | Overdischarge detection voltage for single cell | 3.438 | 3.50 | 3.562 | V | ||||||
Overdischarge detection delay time | 14 | 26 | mS | |||||||||
Overdischarge release voltage for single cell | 3.4 | 3.5 | 3.6 | V | ||||||||
5 | Overcurrent protection | Over current detection voltage | 0.18 | 0.2 | 0.22 | V | ||||||
Over current detection current | 17 | 20 | 23 | A | ||||||||
Detection delay time | 8 | 16 | mS | |||||||||
Release condition | Cut load | |||||||||||
6 | Short protection | Detection condition | Exterior short circuit | |||||||||
Detection delay time | 200 | 500 | μS | |||||||||
Release condition | Cut load | |||||||||||
7 | Resistance | Protection circuitry (MOSFET) | 50 | mΩ | ||||||||
8 | Temperature | Operating Temperature Range | -40 | 85 | ℃ | |||||||
Storage Temperature Range | -40 | 125 | ℃ |