Savantec Steering Diamond Burnishing Tools Enhances Smoothness Of Hardened Steel
Brand Name:Savantec
Model Number:DIA-TU180-R
Minimum Order Quantity:10
Payment Terms:T/T
Product Name:Steering diamond burnishing tools
Trademark:Savantec
Contact Now
Add to Cart
Site Member
Location:
Wuxi China
Address:
26-6 Huibei Road, Liangxi District, Wuxi City
Supplier`s last login times:
within 12 hours
Product Details
Company Profile
Product Details
Savantec Steering diamond burnishing tools enhances the smoothness of hardened steel after treatment
product description
SAVANTEC diamond burnishing tool can be used to roll the outer
circle, inner hole (greater than a certain diameter), end face,
etc. on the lathe. It is not limited by the diameter except the
inner hole, and has wide applicability.
Tool characteristics
The turning diamond burnishing tool is designed exquisitely and can
be used by left and right hands.
The head of the steerable diamond burnishing tool can rotate, and
the positive and negative 90° can be adjusted to meet most of the
rolling angle
processing.
The surface roughness of workpiece after rolling can be less than
Ra0.08 (related to the previous process)
Long service life, it can be extruded at multiple points through
rotating diamond.
Diamond burnishing tools can extrude materials with hardness up to
HRC6
Rolling principle
Under the microscope, during the cutting process of the workpiece,
the tool tip will leave a step like cutting trace on the surface.
The diamond will overcome the yield point of the material during
the sliding process on the workpiece surface under the effect of
the spring force, causing plastic deformation on the material
surface, forcing the highest point of the cutting trace to flow
into the lowest point, so as to obtain a smooth and flat mirror. In
the process of rolling, the material will be hardened due to
plastic deformation, thus improving the fatigue strength of the
workpiece surface.
To achieve the best squeezing effect, the surface finish of the last cutting process of the workpiece should be within RZ15um. Refer to the right figure
To achieve the best squeezing effect, the surface finish of the last cutting process of the workpiece should be within RZ15um. Refer to the right figure
product specification
product image
Savantec Steering Diamond Burnishing Tools Enhances Smoothness Of Hardened Steel
Inquiry Cart
0