Product Details
Three Roller Calender Plastic Sheet / Board Extrusion Line
(HSD),Heat and cold resistance
It consists of SBJZ-series plate &sheet special-purpose single
screw extruder SJZ-series conical twin screw extruder Or SJ-series
parallel twin screw extruder; Equipped with auxiliary downstream
accessories and moulds, it can produce: PE, and other board &
sheet.
The machinery unit consists of extruder, Screen changing device,
melt pump, T-die, 3-rollr or multiple-roller calender, cooling
device, edge cutter, Haul-off system, plate cutter winder,
electrical control system.
Others, The working principle is the 3 states of the hot-plastics
at different temperatures: The pushing force of the screw change
the physical stat from glass state to high elastic state, then
glutinous-and-fluid sate, it comes out from the slim gap of the
die, the rest of the procedures are calendar, cooling-shaper,
edge-cutter, Haul-off, cutter, winder.
(Modle) | (width) | Thickness(MM) | Seedtm/min) | Outputr(kg/h) |
SBJZ-800 | 650 | 0.18-1.5 | 1-25 | 80-320 |
SBJZ -1000 | 800 | 0.2-2.0 | 1-20 | 150-430 |
SBJZ -1500 | 1350 | 1-10 | 0.5-10 | 150-450 |
SBJZ -2000 | 1850 | 2-15 | 0.5-8 | 300-550 |
SBJZ -2200 | 2000 | 1-10 | 0.4-3 | 420-820 |
SBJZ -3000 | 2850 | 2-8 | 0.2-3 | 500-1200 |
SBJZ -7000 | 6800 | 2-6 | 0.2-2 | 600-1560 |
At present, the prevailing heat shrink belt production line in the
market is produced by Qingdao Huashida Machinery Co., LTD. Because
Huashida has advanced technology, mature experience, reasonable
formula, and a supporting industrial chain up and down - both to do
thermal shrink belt production line, but also to produce thermal
shrink belt, but also to sell raw materials, so that Huashida's
thermal shrink belt production line is used by everyone is really
not a false head.
PC/PP hollow cross-section plate. PVC transparent soft & hard
plat & sheet. PVC foamed plate, PMMA/ABS co-extrusion bathing
plate, inside chamber plate of the refrigerator and other
multiple-layer composite co-extrusion plate & sheet size:
Width: 300MM-700MM thickness0.2MM-45MM: Output rate: 80-1800KG. /H.
The machinery unit is the best solution for plate & sheet
production.
HDPE SHEET EXTRUDER
PLC CONTROL SYSTEM
HDPE sheet can
Company Profile
1. Our Factory
Qingdao Huashida Machinery Co., Ltd. is located in Qingdao High
& New Technology Industrial Area- Qingdao Huashida industrial
Park, covers an area of about 4000 square meters. We have tens of
years experience in plastic pipe, sheet, and board extrusion lines,
and pipe joints and welding tools such as heat shrinkable sleeve,
Electro fusion sleeve etc.

2. Our main products
Our main products include as following,
HDPE PU pre-insulation Jacket Pipe extrusion line
3PE steel pipe anticorrosion&coating machinery
Rubber&plastic foam flexible insulation tube/sheet production
line
HDPE water supplying pipe extrusion line
PE PP sheet board extrusion line
Heat shrinkable sleeve production line
Hollow wall spiral pipe production line
Plastic welding rod extrusion line
Radiation cross-linked PE heat shrinkable sleeve
Electro fusion tape
Portable extrusion welder

3. Our products Application.
Our machines make products what are widely used as jacket pipe of
PU foam insulation pipe in municipal heating pipe system; Municipal
water supplying and drainage pipeline; Oil and gas pipeline; Pipe
joints of plastic drainage water pipes, PU foam insulation
pipelines, 2PE/3PE oil and gas pipelines;
Besides manufacturing machines, we also make Heat shrinkable
sleeves and electro fusion sleeves and plastic welders, which are
widely used as pipe joints and sealings of plastic drainage water
pipes, PU foam insulation pipelines, 2PE/3PE oil and gas pipelines;
4. Our certificates and Patents
5. Our Purpose and Market
Our purpose is to supply highest cost-effective products and the
most suitable solutions to our clients, as well as intimate help
and service, on this basis we reach a win-win situation.
For over 14years We have exported to many foreign countries, such
as Russia, Iran, Turkey, U. A. E, Sudan, Ukraine, Uzbekistan,
Azerbaijan, South Asia, Poland etc.
6. Guarantee and after service
The guarantee period is 12 months from the date of installing, but
no more than 14 months from the date of delivery. After this period
we are obliged to provide with lifelong service at the expense of
Buyer.
During the warranty period we are responsible to provide trouble
shootings and help the customer to solve the problems, provide
spare parts which are broken, except breakings caused by the Buyer.
We will provide the technical service train the workers from the
buyers for free.
We can also send technicians to the buyer's companies abroad for
help installation and testing the lines. But the buyer shall pay
for the round trip tickets, accommodation, transportation, medicine
treatment and insurance of the technicians in foreign countries and
some salary accordingly.
