Advanced 0.015-15mm Clients' Filtration Scraping Brush Automatic Self Cleaning Filter
Brand Name:TOP
Certification:ISO 9001:2008
Minimum Order Quantity:1pc
Applicable Industries:Manufacturing Plant, Food & Beverage Factory, Farms
Showroom Location:None
Video outgoing-inspection:Provided
Contact Now
Add to Cart
Verified Supplier
Location:
Chengdu Sichuan China
Address:
No. B-2307, New Hope International, 69 Tianfu 3rd Street, High-Tech Zone, Chengdu, Sichuan, China
Supplier`s last login times:
within 31 hours
Product Details
Company Profile
Product Details
Scraping Brush automatic self cleaning filter
Automatic self-cleaning water filter is the high efficiency scraping self-cleaning filter independently developed by TOP. Filtration ranging from 50-500 micron. It can avoids extruding and breaking the impurities and is capable of the filtration for water and liquids of viscosity up to 800000cps.
Self cleaning Features
- Automatic 24-hour on-line filtration, no frequent changing out and cleaning
- No disposable filter media consumption, save filter media cost and environment cost
- Stainless steel scraping blade, good impurity removing performance
- Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap
- Very low pressure drop, stable flowrate, save energy consumption
- Back-flushing function can be added to help clean the filter element
- Close filtration, no dangerout liquid leakage, good for safe production
- Discharge waste liquid with high impurity concentration, avoid valuable liquid loss
- Various modular combination and automation modes available, meet different filtration needs
Technical parameters
General type code | TPX11/TPX22/TPX34/TPX75/TPX100/TPX136 |
product type | Automatic self cleaning filter |
Liquid available | water and viscous liquids(<800000cps), impurity<1000ppm |
Filtration Rating | 50-500μm |
Standard design pressure | 1.0MPa,high design pressure available |
Filter Area | 1100/2200/3400/7500/1000/1.36 cm2 |
Volume | 16/30/50/145/195/320 L |
Design Temperature | 0-200℃(determined by the seal material) |
Cleaning differential pressure: | 0.05MPa |
Differential pressure instrument | differential pressure transmitter(DPT) or differential pressure switch(DPS) |
Gear motor | 180W, 3P,380V,protection class IP55, worm reduction gear |
Housing wet part material | 304/316L/CS |
Scraping blade material | 304/316L |
Housing seal materia | NBR/VITON(FKM) |
Filter element type | V-slot slotted metal filter element,316L |
Discharging valve | Pneumatic ballvalve, protection class IP65 |
Facility Supply | 380V AC,0.4-0.6MPa clean and dry compressed |
V-slot Features
Slot Section of self cleaning filter
The Continuous slot screens are made of V-shape wire or wedge shape wire around an internal array of longitudinal support rods. Each jointpoint of these wire is fusion welded, the V or wedge shaped profile wire wraps around the support rods over the full length of the screen creating a continuous slot opening. Therefore the screen allows water or oil to enter the well freely in ample quantities while keeps the majority of sand and gravel out of the well at the same time.
Self cleaing filter Continuous slot: support rods and longitudinal wire makes an opening which
significantly increase the available opening area, and allow better
access to the water flow.
Self cleaing filter High open area: reduce the water level, thus to save energy consumption.
Meanwhile, high open area can make the groundwater enter the screen
much slower than other filtration apparatus, which can avoid sand
from entering screen due to high pressure, hereby lowering pump
wear down.
Self cleaing filter High Strength: It takes stainless steel as main raw material, then is welded at
high temperature, which guarantee high strength to bear big water
pressure, hereby it has long life span.
Common flow styles of different screens
Filter Structure Options
V-Shape slots: V-Shape wire gives inwardly widening V-shape slots
Self cleaning filter Working Principle
The liquid enters the filter from the inlet(1), flows through the filter element(6) from outside to inside. The filter element bottom is connected to the outlet(2), through which the liquid flows out. After the filter element captures the impurities, the cleaning action is trigger by the preset time or differential pressure value. The gear motor(4) drives the scraping blades(7) to rotate and remove the impurities on the filter element outside surface. The impurities moves off along the blades and falls down to the filter bottom. The rotating plates push the gravity impurities into the collection chamber(5). The impurities are collected at the filter bottom and in the collection chamber. The discharging valve open per the preset time and discharging the waste liquid with high impurity concentration through the drain outlet(3), the purged liquid can be reclaimed if necessary.
Certificate
Client Visit
Packaging & Shipping
Plastic film or wooden boxes package or as per customers' requirements.
Company Information
Top Machinery is located in Chengdu, being with convenient traffic, developed communication, vast territory and a good space for development. We are professional manufacturer and exporter of accessories for water, oil, gas and environmental industries. Since the company established, we insist on good quality, making the business range extend continually.
Advanced 0.015-15mm Clients' Filtration Scraping Brush Automatic Self Cleaning Filter
Inquiry Cart
0