Large Capacity Stone Aggregate Production Line Energy Efficiency
Brand Name:Huaji
Minimum Order Quantity:1 set
Payment Terms:L/C, T/T
Product Name:Crushing Production Line
Feature:High Yield Rate Low Operation Cost
Production capacity:various
Contact Now
Add to Cart
Verified Supplier
Location:
Weifang China
Address:
Binhai Economic Development Zone, Weifang City
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Stone (Aggregate) Production Line product description
I. Program I
When the silica content in the stone is less than 25%, the
following scheme can be recommended:
Stone (aggregate) production line is composed of raw material silo,
vibrating (screening) feeder, jaw crusher, impact crusher,
vibrating screen, belt conveyor, electric control system and other
equipment. It has the features of good aggregate particle shape
(square), no fear of high moisture, low operation cost, high
output, high automation degree, etc. It meets the requirements of
each aggregate industry, especially suitable for the construction
of highways and high-speed railroads. It is the stone (aggregate)
production line with high cost performance, small investment and
low running cost in the domestic market.
5mm; 5-12mm; 12-31.5mm finished stone is sent away by belt
conveyor, and above 31.5mm stone is returned to impact crusher for
crushing again, forming a closed loop.
According to the customer such as the requirement of 5-12mm rice
stone, it can be sent by the belt machine through the fabricator to
the roller sand making machine to produce mechanism sand, and then
sent to the sand washing machine to clean the soil, and finally
sent to the dewatering screen to dewater, and at the same time, the
fine sand will be recycled up.
When the processing capacity of stone (aggregate) exceeds 200t/h;
it is recommended to add another one (two) impact crusher in
parallel to complete.
Second, program two
When the silica content in the stone is higher than 25%, the
following scheme can be recommended:
The stone (aggregate) production line is composed of raw material
silo, vibrating (screening) feeder, jaw crusher, cone crusher,
vibrating screen, belt conveyor, electric control system and other
equipment. It is characterized by low running cost, large output
and high degree of automation. It is a stone (aggregate) production
line with high capacity and low operation cost in the domestic
market today.
Process flow: stone (aggregate) production line work, in accordance
with the sequential order to open the electronic control system,
start all the equipment, the large stone by the loader into the
silo, by the vibrating feeder uniformly into the jaw crusher for
coarse crushing, coarse crushed pieces of material through the
transit silo by the belt conveyor to the cone crusher crusher
again, the crushed pieces of material by the belt conveyor to the
vibrating screen screening, screening out different specifications
of the stone. The finished materials of 0-5mm, 5-12mm and 12-31.5mm
are sent away by the belt conveyor, and the materials above 31.5mm
are returned to the cone crusher for crushing again, forming a
closed loop.
According to the customer such as the requirement of 5-12mm rice
stone can be sent to the roller sand making machine by the belt
machine to produce mechanism sand, and then sent to the sand
washing machine to clean the soil, and finally sent to the
dewatering screen for dewatering, and at the same time, the fine
sand will be recycled out.
When the processing capacity of stone (aggregate) exceeds 300t/h;
it is recommended to add another (two) cone crushers in series to
complete.
Third, program three
When the stone is flaky in the material, the silica content is
lower than 35%, and the granularity is required to be square, the
following scheme can be recommended:
Stone (aggregate) production line is composed of raw material bin,
vibrating (screening) feeder, jaw crusher, synchronized toothed
roll crusher, vibrating screen, belt conveyor, electric control
system and other equipment. It is characterized by good grain
shape, no fear of high moisture, low operation cost, large output
and high degree of automation. It is a stone (aggregate) production
line with good grain shape, high capacity, no fear of moisture,
reliable performance, convenient operation and low operating cost
in the domestic market today.
Process flow: stone (aggregate) production line work, in accordance
with the sequential order to open the electronic control system,
start all the equipment, large stone by the loader into the silo,
by the vibrating feeder evenly into the jaw crusher for coarse
crushing, coarse crushed pieces of material by the belt conveyor
through the fabricator to the roll crusher crusher again, the
crushed pieces of material by the belt conveyor to the vibrating
screen for screening, screening different specifications of the
stone material. The finished materials of 0-5mm, 5-12mm and
12-31.5mm are sent away by the belt conveyor, and the materials
above 31.5mm are returned to the roll crusher to be crushed again,
forming a closed loop.
According to the customer such as the requirement of 5-12mm rice
stone can be sent to the roller sand making machine by the belt
conveyor to make sand, and then sent to the sand washing machine to
wash the soil and water, and finally sent to the dewatering screen
to dewater, and at the same time, the fine sand will be recycled
up.
When the handling capacity of stone (aggregate) is more than
300t/h; it is recommended to add another one (two) roll crusher in
parallel to complete.
Fourth, special tips
1, the processing capacity of stone (aggregate) production line can
be designed according to customer requirements, configured with
different models of equipment, the production of standard aggregate
(12-31.5mm), a single production line can be designed 30-2000t/h to
meet the needs of different customers.
2, the above three options of this stone (aggregate) production
line process design, equipment configuration, according to the
customer's production requirements and our proposal to determine,
our company provides pre-sale, sale, after-sales service, fully for
the customer to do a reasonable, economical stone (aggregate)
production line.
3, stone production line according to customer requirements, the
configuration of the dust collector, that is, in each stage of the
crusher inlet and outlet; vibrating screen inlet and outlet are
added to the dust collection port; the use of dust collector fan
high negative pressure will be adsorbed in the fine particles in
the bag, and regular automatic vibration to clean up the bag, the
dust will be collected, to meet the national environmental
standards.
Stone (Aggregate) Production Line working principle
Stone (Aggregate) Production Line Technical Parameters
Large Capacity Stone Aggregate Production Line Energy Efficiency
Inquiry Cart
0