Product Details
DPS(6kW) High Frequency Isolated AC DC Bidirectional Converter
Module For Lithium Battery Testing Equipment
Using the latest optimized hardware design, advanced control
algorithm and advanced manufacturing process, the HF isolated
bidirectional power supply is specially developed for lithium
battery testing equipment, AC and DC analog power supply, feedback
electronic load, EV charging and discharging equipment and energy
storage equipment. Intelligent forward and backward operation,
seamless switching, can meet the occasion of two-way energy
transformation, and has high frequency isolation function, higher
security. At the same time, the product is equipped with
on-grid/off-grid switching function, and the switching time is not
more than 10ms, which can be applied in more occasions.
Features
- Intelligent grid-connected operation, bidirectional high power
factor, bidirectional low harmonic current, can effectively improve
the quality of the power grid;
- With intelligent reactive power compensation and harmonic
compensation;
- With off- grid/grid-connected switching function, the switching
time shall not exceed 10ms;
- With islanding protection (settable), intelligent forward and
backward operation to improve system reliability;
- With multiple modes of constant voltage, constant current, constant
resistance and constant power;
- Support series and parallel capacity expansion, extend the DC side
voltage to DC 1200v, cascade form three-phase system, can be
applied to more occasions;
- The latest charging and discharging test technology will not cause
interference to the BMS management system, which is suitable for
daily discharging, charging and multiple cycles of lithium battery;
- Voltage, current, power, etc. can be set, wide output voltage
range, to meet the charging and discharging requirements of most
lithium battery packs and energy storage equipment;
- The intelligent DSP design realizes the full digital control of the
energy storage converter module and determines the high reliability
of the control;
- Multiple safety protection, input over and under voltage
protection, output anti-reverse connection protection, short
circuit protection,over temperature protection, air duct
abnormality detection, etc.
Technical parameter
AC side parameters | | PMA006-A011-MI | | | 6kW | wiring | | Single-phase three wire system | voltage range | | 220Vac±15% | Rated frequency and range | 45~65Hz(Adaptive 50/60Hz power grid) | Power factor adjustment range | ±1 | THDi | ≤5% |
DC side parameters | | PMA006-A011-MI | | | 100Vdc | | | 60A | Voltage range | | 10Vdc-450Vdc | Current range | | ±60A | Voltage accuracy | 0.1% F.S | | 0.1% F.S | Voltage limiting | Yes | | Yes |
Basic Characteristics | Description | AC/DC starting function | Yes | Switching time forward and backward | ≤10ms | | 92% | H*W*D | 129*143*415mm | | 7.5kg |
Environmental Conditions- Operating Temperature Range
| °C | -20℃~+45℃ | | | %RH | <+95 | Relative humidity, non-condensing | Storage temperature | °C | -40 ~ +55 | | | %RH | 0 ~ +95 | Relative humidity, non-condensing | | - | | | | m | 3000 | | | - | IP20 | | | dB | <70 | |
CommunicationCommunication mode | - | - CAN,RS485,Ethernet,dry contact
| | Report signal | - | Various protection signals, voltage and current signals | | Receipt signal | - | On off signal | |
|
Company Profile

Shenzhen Acadie New Energy Co., Ltd is an international trader specializing in the field of new
energy. Founded in 2017, it islocated in China's innovative city -
Shenzhen. The company hastwo business segments. One is sales of
electric vehicle chargingpiles. Its factory is Shenzhen EN Plus
Tech Co., Ltd. (a capitalaffiliated enterprise). The other business
is the development andsales of new energy storage products and
battery testingequipment. Its R&D center is located in Xi 'an,
the hard technologycapital of China. The products are produced by
commissionprocessing and IMI Chengdu factory (SpeedTech) is the
OEM. Itsproducts have been exported to more than ten countries,
includingNew Zealand, Norway, Sweden, France, UK, Belgium,
Germany,Austria, Israel, Turkey, South Korea, India, etc.
Xian Battery Lab
Xi 'an e-BTLA is a comprehensive solution provider for automated
testing of new energy vehicles and energy storagemicro-grid.Based
on the new energy vehicle afterservicemarket, the company actively
participates in the developmentof the industry, accelerates
technological innovation in the fieldof energy interconnection,
constantly meets customer needs,and strives to build itself into a
first-class enterprise in theindustry to achieve a win-win
situation of enterprise value andcustomer value. The products are
widely used in the mainengine plants and service stations of new
energy vehicles,battery production enterprises, battery research
and testinginstitutions, battery recycling step utilization and
other fields. In2022, the domestic sales revenue exceeded 60
million yuan.
Mission: Open the Era of Energy Intelligence
Business philosophy: customer-centered, striver-oriented,
quality-first and science-oriented
Target: The world's top energy Internet infrastructure and service
provider