Add to Cart
A typical rotary vacuum pump is comprised of a housing, a rotor and
a series of radially moving vanes, which come in dry-running or
lubricated versions (the latter are the most commonly used in the
majority of industrial applications). The rotor is generally the
only continuously moving vane vacuum pump part. There's also a
working chamber inside the housing, which is divided into two
separate compartments by the rotor and vanes. Many vane vacuum
pumps also include an inlet valve as a safety feature.
Rotary vane vacuum pumps are available in single-stage and
two-stage versions. The stages refer to the number of times that
compression actually occurs. Two-stage pumps are also able to
attain a lower pressure than single-stage pumps, due to the fact
that gas is only admitted during the high pressure stage.
Rotary vane vacuum pumps are ideally suited for a wide range of low
and medium vacuum applications such as general and chemical
laboratory, analytics, freeze drying, process engineering and more.
A rotary vane pump works via positive displacement, which is when
volumes of air or gas are confined within a closed space and are
compressed when the space is mechanically reduced.
Product Model | 50/60Hz | RH0025 |
Pumping Speed | 50Hz | 25m³/H |
60Hz | 30m³/H | |
Ultimate Pressure | mbar | 0.5 |
Inlet Diameter | G3/4 | |
Voltage | 50Hz | 220-240/380-415V |
60Hz | 220-280/380-440V | |
Motor Power | kW | 0.75 |
Current (A) | 50Hz | 3.0/1.75 |
60Hz | 3.6/2.1 | |
Rotate Speed | r/min | 3000/3600 |
Noise Level | dB | 62 |
Oil Volume | L | 0.5 |
Net Weight | kg | 19 |