

Add to Cart
The MTL5082 connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates
it and repeats the resistance to a monitoring system in the safe area. The module is intended typically (but not exclusively) for use with Pt100
3-wire RTDs. Switches located on top of the module allow selection of 2-, 3-, or 4-wire RTD connection. The MTL5082 should be considered
as an alternative, non-configurable MTL5074, for use in RTD applications where a resistance input is preferred or needed instead of 4/20mA.
The design is notable for its ease of use and repeatability. The number of wires which can be connected on the safe-area side of the unit is independent of the number of wires which can be connected on the hazardous-area side. The module drives upscale in the case of open-circuit detection.
MTL5521 | MTL4546Y | MTL5501-SR | MTL5510 |
MTL5522 | MTL4549Y | MTL5511 | MTL5513 |
MTL5531 | MTL4573 | MTL5514D | MTL5516C |
MTL5532 | MTL4575 | MTL5521/5521-T | MTL5522 |
MTL5541 | MTL4646Y | MTL5523V | MTL5523VL |
MTL5541S | MTL4850 | MTL5525 | MTL5526 |
MTL5544 | MTL4851 | MTL5532 | MTL5533 |
MTL5544D | MTL4852 | MTL5541/MTL5541-T | MTL5541A |
MTL5546 | MTL5018 | MTL5541S/5541S-T | MTL5544 |
MTL5546Y | MTL5032 | MTL5544AS | MTL5544S |
MTL5561 | MTL5042 | MTL5573 | MTL5561 |
MTL5573 | MTL5044 | MTL5546 | MTL5546Y/5546Y-T |
MTL5575 | MTL5049 | MTL5575 | MTL5576-RTD |
MTL5582B | MTL5511 | MTL5581 | MTL5582/5582B |