Regularly check the height, cleanliness and temperature of the
hydraulic oil.
It is recommended to replace the hydraulic oil every six months.
Replaced worn seals timely.
The mold should be cleaned and maintained in time, and the surface
should be coated with a thin layer of protective oil.
Carefully handle the temperature sensor of the heating coil, and
store it properly.
Maintenance
1. Pump use NO 68 hydraulic oil, after testing machine
40hours,thenopen oil tank to remove all the oil , filter the dirty
and cleanoil tank,thenfilling clean oil once again, change the oil
every year.
2. Oil seals should change when found leakage after sometimelater,
liftcylinder piston to top limit when change the seals, useroller
supportworking table ,loose bolt between board and working
table,press“closemould” button, fix joint board on lift working
table ,press “openmould”button ,let piston drop to bottom limit,
take out old seals ,put newseals(note: lip down, do not damage it)
then crawl “slowspeed” bottom,cylinder piston raise slowly , keep
seals fit inside completely, andfixboltonce again.
3.To check all joints of electrical system normal, when contact
pointsappear copper black ,use fine sandpaper to remove, fix all
wirescrewtightly after 3 days.
Process Guidance
Due to the special technology of the equipment, customers can go to
the factory to learn about the installation, commissioning,
operation, mold change, maintenance, process guidance of the
equipment for free before delivery.
If you are unable to come to our company to study due to
inconveniences such as distance, personnel, time, we can arrange
for engineers to come to guide the installation, commissioning,
operation, mold replacement, maintenance, and process guidance of
the equipment under the agreement of the other party.
We can also conduct remote guidance. Users can choose other methods
such as telephone, video, email, etc. to learn about equipment
installation, commissioning, operation, mold change, maintenance,
process guidance, etc.of the equipment.
The advantages of a Polymer PTFE Rod Ram Horizontal Extruder
Machine include:
- High production efficiency: The machine is designed to extrude
Polymer PTFE rods horizontally, allowing for continuous and
efficient production.
- Precise control: The machine is equipped with advanced control
systems that ensure precise control over the extrusion process,
resulting in consistent rod dimensions and quality.
- Versatility: The machine is capable of extruding Polymer PTFE rods
of various diameters and lengths, making it suitable for a wide
range of applications.
- Easy operation: The machine is designed with user-friendly controls
and interfaces, making it easy to operate and control the extrusion
process.
- Low maintenance: The machine is built with high-quality materials
and components, reducing the need for frequent maintenance and
ensuring long-term durability.
- Energy efficiency: The machine is designed to minimize energy
consumption, making it cost-effective and environmentally friendly.
- Safety features: The machine is equipped with safety devices and
mechanisms to ensure operator safety during the extrusion process.
- Customization options: The machine can be customized to meet
specific production requirements, allowing for flexibility and
adaptability.
After Sales Service
From the date of receiving the machine, the warranty period of all
machine accessories is one year. We provide free maintenance
guidance service during the warranty period.
If there is any problem with the accessories outside the warranty
period, please contact us in time to explain the problem, and we
will provide follow-up resolution within 24 hours.
If we have a local distributor, we can contact the local
distributor for cooperation.
All questions about the equipment can be consulted to us by mail,
video, telephone, etc.
Service Phone:+86-0519-83999079
PTFE Rod Line Automatic Feeding Equipment
Vacuum automatic feeding, including compressed air reverse blowing
system, start feeding system, wash hose, suction gun, vacuum
generator, PCB controller,throughput 30-300 kg/h, diameter 150mm
and height 600mm, set automatic feeding time and discharging time,
powder flow is controllable, all stainless steel production,
intelligent control.
The mixing barrel is 600mm in diameter and 700mm in height, with a
2.2kw reduction motor, a stirring speed of 15-25 turns/min, 8-10mm
thick bottom plate, and a feeding capacity of 75-90kg.
Technical Parameters:
Model | Compressed air consumption | Air pressure |
SKVQC-10 | 180L/min | 0.4-0.6MPa |
Related Optional Equipments
