Allen Bradley 1794-PS13 Flex I/O DC Power Supply Module

Product Details:
Manufacturer : ALLEN BRADLEY
Product No. : 1794-PS13
Product Type : Flex I/O DC Power Supply Module

The Allen-Bradley 1794-PS13 is a Flex I/O power supply. This power supply has a nominal supply voltage of 120V AC, 50/60 Hz; 0.6 A max. and 230V AC, 50/60 Hz; 0.42 A max with a voltage range of 85-264VAC, 47-63 Hz. This power supply module is used to provide power to the Flex I/O modules and adapters. It has a maximum input current of 0.7 Amperes and able to withstand an inrush current of 40 A typical, 1 AC cycle @ Vin 265V AC, 55 °C.

The Allen-Bradley 1794-PS13 is a Power supply module that is part of the PowerFlex I/O product family. This power supply has a power surge that is enough to power up to Four (4) adapter. It has a voltage input range of 85-264VAC, 47-63 Hz and provides a nominal output voltage of 24VDC.

The 1794-PS13 supports the installation method of the entire PowerFlex I/O system. It supports daisy chaining of the supply output, to power up the supported adapters and may also be used in combination with AC and DC modules. This power supply has built-in indicator that energizes Green when the output voltage is greater than 20.4V DC, but less than 28V DC and remains OFF when no power applied to the power supply, output voltage exceeded 35V DC, and overvoltage protection shut the unit down and output current is above 1.4 A.

The 1794-PS13 has a physical dimension of 87 (H) x 69 (W) x 69 (D) mm 3.4 (H) x 2.7 (W) x 2.7 (D) inches. It has an open type enclosure and requires wire size of 0.34-2.5 mm2 (22-12 AWG) solid or stranded copper wire with insulation rating of 75 °C (167 °F ), or higher, and maximum insulation thickness of 1.2 mm (3/64 in.). The module’s wiring category is 2, and requires application of 0.8 Nm (7 lbs-in.) Torque to tighten connections.

The 1794-PS13 has an output voltage range of 20.4-27.6 VDC including noise and 5% AC ripple. It has a 1.3 A output current, output power of 31.2 Watts and output ripple of 1200 mV peak-to-peak.

The overvoltage protection of the 1794-PS13 module is internally limited to 40 Volts DC for the output. The 1794-PS13 comes with a power indicator that turns green when it is on and the output voltage is greater than 20.4 Volts DC but less than 28 Volts DC. This indicator does not light up when turned off. The entire module measures 3.4 x 2.7 x 2.7 inches and it has an open-type enclosure. Isolation between the AC input terminals and DC output terminals are required for this module and the isolation voltage requirement is 2500 Volts DC for 1 seconds. The nominal output of this module is +24 Volts DC and its output voltage regulation is 20.4 to 27.6 Volts DC, +/- 15% including noise and the 5% AC ripple. The module's output power is 31.2 W, the maximum output ripple is +/-5% 1200 mV peak-to-peak, and the maximum output current is 1.3 Amps. Its power dissipation is 7 W and thermal dissipation is 23.9 BTU/hour. The 1794-PS13’s operating temperature of 0 to 55 degrees Celsius and its storage temperature is -40 to 85 degrees Celsius, as well as a relative humidity of 5 to 95% (non-condensing). The module also has an operating vibration of 5 g at 10 to 100 Hertz, an operating shock of 30 g, and a non-operating shock of 50 g.

Related Models:

Company Introduction:
Achievers Automation Limited has more than 10 years experience in the market of Industrial Automation, specialized in reselling factory sealed Probe, Sensor, DCS,isolator barrier, HMI, PLC,Adapter,Profibus connector and cable from Brands as BENTLY NEVADA, Endress+Hauser, YOKOGAWA,MTL,Allen-Bradley, Pepperl+Fuchs,Rosemount, ASCO, Schneider, Lenze, Pro-face, Mitsubishi, Omron, Lenze, Delta, Honeywell, Siemens and etc. If you have any request, please do not hesitate to contact us.

FAQ of Achievers
Q:Are the Products Genuine OEM Units?
A: These items have been certified by Achievers Automation Limited to be genuine OEM Units obtained through OEM or independent third-party channels.
Q:How will you arrange shipment?
A: We can arrange shipment based on your request. We have cooperated forwader who can arrange shipment via FedEx, DHL,TNT with good price.
Q:What is the warranty of goods?
A: One-year Warranty.

Achievers Automtation Limited deals with a complete range of industrial automation components and instruments with more than 12 years’ experience, and always try best to provide quality goods and timely services to our valued customers from over 45 countries worldwide.

Achievers serves the Oil & Gas industries, EPC contractors, System Integrators and other industrial automation and process control companies worldwide. The industries we serve include Oil & Gas, Chemical, Petrochemical, Mining, Energy & Utilities, Pharmaceuticals, Electronics, Food and etc.

The company provides a diversified range of products to meet any process control and automation challenges in the industry. We stock and distribute pressure & temperature transmitters, level controller & transmitters, temperature probes, flowmeter, vibration monitoring devices, chart recorders, sensors, PLC, DCS, HMI, measuring instruments and other field instruments.

Below are the TOP BRANDS we handle in the past 12 years:

Bently Nevada 3500 Vibration Monitoring System&3300 Proximity Probes, Sensors & Transducer Systems

ALLEN BRADLEY Industrial Control Products

Pepperl-Fuchs Industrial Sensors & Isolated Barrier

MTL Instruments Isolated Barrier

Endress+Hauser Flow, Level, Liquid Analysis Instrument

YOKOGAWA DCS & Field Instruments & Process Analyzers

Rosemount Analytical Products

ASCO Solenoid Valves

FISHER Valve&Positioner

IFM Sensors & Controllers

ABB V18345 Valve Positioner

ABB Bailey Infi 90 and Net 90 Modules

FISHER DLC3100 Digital Level Controller

TELEDYNE Oxygen Sensor & Fuel Cell

HONEYWELL Switches & Transmitter

VEGA Level Measurement Products

AUMA Electric Actuators and Gearboxes

SMC Controls, process, and Industrial products

SICK Industrial Sensors

FESTO Pneumatic & Electric Automation Products

YASKAWA Industrial Ac Drives

BECKOFF Controllers & I/O Modules

BALLUFF Linear Position Sensors

SCHMERSAL Safety switches & Safety Systems

In achieving business objectives, we highly value integrity, trust, honesty, social responsibility and moral and business ethics.The company has put a lot effort in establishing strong ties with the customers. Our effort in sharing problems encountered by the customers and finding the solution hand-in-hand with them has made us the first-choice supplier for the customer. We have always striven to provide the right things for the right customers.In addition, our ability to source a wide range of parts and products for our diversified customers has fortified our status as an all-purpose supplier.

In the years to come, we will continuously strive to incorporate upgrade in the areas both of customer service, and product and engineering knowledge. Not only do we want to grow together with our customer, but we also want to make contribution.

Legal Disclaimer

www.achievers-automation.com is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers that are offered in www.achievers-automation.com All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product in our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.