

Add to Cart
BP156-M Pressure Transmitter Sensor
Introduction of mini pressure transmitter sensor:
BP156-M miniature pressure transmitter sensor using piezoresistive
pressure sensor, with isolated stainless steel diaphragm as a
signal sensing element, after automatic testing, laser fine tuning
compensation;The amplifier circuit uses a stainless steel housing
to convert the sensor signal into a standard output signal. The
transmitter is stable and reliable, with excellent flexibility,
sensitivity and diversity.The products are widely used in
petroleum, chemical industry, metallurgy, power station, hydrology
and other industries of pressure measurement and control.
Product Features of mini pressure transmitter sensor:
1. Temperature range: -20 to 85ºC;
2. Wide operation temperature range -40~125ºC;
3. High performance pressure sensor;
4. Various 4~20mA/0.5~4.5V/1~5V/ 0~5Voutputs available;
5. Small dimensions, dimension customizble;
6. M12 Connector;
7. OEM, ODM, customization service available;
Applications of mini pressure transmitter sensor:
1. Pressure measurement of non-corrosive gases and liquids with 316L stainless steel
2. Applied in the marine and aviation industries
3. Used in industrial on-site processes such as petroleum, chemical, metallurgy, power generation, and hydrology
4. Utilized in hydraulic and pneumatic control systems
Performance Parameters of mini pressure transmitter sensor: | |
---|---|
Measurement Range | 0kPa ~ 10kPa…20MPa |
Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
Overload | ≤ 1.5 times of the rated range |
Accuracy @ 25ºC | ±0.25% (Typ.) ±0.5% (Max.) |
Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
Frequency Response | 2.4Khz |
Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
Operating Temperature | -20ºC~80ºC |
Storage Temperature | -40ºC~120ºC |
Vibration | 10g,55Hz ~ 2kHz |
Housing Material | 304,316L |
Diaphragm Material | 316L |
Insulation Resistance | 100MΩ 100VDC |
Explosion-proof Rating | Ex ia IIC T6 Ga |
Protection Rating | IP65 |
O-Ring Seal | Fluoro rubber |
Weight | ~0.05kg |
Output Signal | Supply Voltage | Output Type |
4~20mA | 12~30VDC | 2/3/4 wire |
0~10/20mA | 3 wire | |
0/1~5V | ||
0/1~10V | ||
0.5~4.5V | 5VDC |
Selection Examples |
Ordering tips |
1. When selecting a product, please ensure that the medium under test is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products do not include a digital display.
3. To ensure the reliable operation of the product, you are advised
to install lightning protection devices on site and ensure that the
product and power supply are grounded reliably.
4. Cable Without cable by default. Three materials are available if
required. If there are no special instructions, polyethylene cable
materials can be used. If you need a different cable material,
please specify it in the order form.
5. In case of special requirements such as strong vibration,
instantaneous impact force, strong electromagnetic or RF
interference, please inform us and indicate in the order.
Order Guide of mini pressure transmitter sensor | |||||||||
BP15X | Analog Pressure Transmitter | ||||||||
Code | Outline Construction | ||||||||
5 | Packard plug | 6 | Sealed Direct Output Cable 1.5 meters | ||||||
7 | Mini Hirschmann Connector | 8 | Large Hirschmann Connector | ||||||
Measurement Range | 0kPa ~ 10kPa…5MPa | ||||||||
(0-X)Kpa or MPa | X: Indicates the Actual Measuring Range | ||||||||
Code | Power Supply | ||||||||
D1 | 24VDC | ||||||||
D2 | 5VDC | ||||||||
D3 | Other | ||||||||
Code | Output Signal | ||||||||
S1 | 4~20mADC | S5 | 0~20mADC | ||||||
S2 | 1~5VDC | S6 | 0~10VDC | ||||||
S3 | 0~5VDC | S7 | 0.5~4.5VDC | ||||||
S4 | 0~10mADC | ||||||||
Code | Pressure Connection | ||||||||
J1 | M20×1.5 | ||||||||
J2 | G1/2 | ||||||||
J3 | G1/4 | ||||||||
J4 | 7/16-20UNF | ||||||||
J5 | Others(¢50.4 Flange) | ||||||||
Code | Electrical Connection | ||||||||
B1 | Hirschmann | ||||||||
B2 | PG7 | ||||||||
B3 | Cable Sealed Outlet 1.5 meters | ||||||||
B4 | Other | ||||||||
Code | Pressure Type | ||||||||
G | Gauge Pressure | ||||||||
A | Absolute Pressure | ||||||||
S | Sealed Reference Pressure |
FAQ:
1. Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance.
Customization available.
2. Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service.
3. Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure
sensor transmitters per month, so we are fully capable of meeting
the needs of large-scale orders. However, it is advisable to
contact our sales team in advance to ensure smooth production and
delivery scheduling.
4. Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may
vary.
5. Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term
partners.
6. Q: What is the warranty of your products? And after-sales
service?
A: Our warranty time is 24 months after shipment, and our
after-sales will respond with your questions in 24hrs, remote
instruction by PC network is always available.