100-250C LPG Straight Tunnel Powder Coating Oven For Powder Coating Line
Brand Name:OEM
Certification:CE ISO
Minimum Order Quantity:Negotiable
Delivery Time:5-15 DAYS
Payment Terms:Negotiable
Product Name:LPG Powder Coating Oven
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
Furong Industrial park， Xishan District ，Wuxi city ,Jiangsu,China
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
100-250C Straight Tunnel Powder Coating Oven For Powder Coating
Line
Whether electrical, gas or diesel fired. Whether batch type or
conveyorized tunnel type. Designed and built specially for Powder
& Liquid curing purposes assuring you of low power consumption
with uniform temperature throughout the working space in the oven.
Melting & Curing constitutes a highly critical phase of the
powder coating process. The curing schedules recommended by the
powder or liquid supplier must be strictly followed, if good
adhesion & corrosion resistance is to be achieved. While powder
melts at approx.100°C, curing requires higher temperatures usually
between 180°C to 200°C.If the curing is inadequate, the quality
will be brittle and flake-off easily. If the powder coat is exposed
to harsh heat its colour may change.
Powder coating oven Construction
Welded or modular construction with high quality M.S Sheet
Hot air circulating blower for uniform heat
High quality insulation (Glass/mineral wool) to eliminate heat loss
Electrical,gas& diesel fired (heat exchanger)
Digital temperature controller with auto on/off or manual
Asbestos gasketing, flap sliding doors
Perfect locking arrangement and heat resistant paint(in side)
Dust blowing system:
The automatic dust blowing system uses compressed air to blow dust, and uses centrifugal fan to remove the dust outdoors:
Technology parameters:
1. System chamber measurement:25000×1600×2000mm
2. Power:380V/50HZ
3. High voltage generator,power 220V,output voltage is 0~100 KV, and the maximum output current is 200A
4. Powder recycling mode is filter pulse recovery
5. Pressure of pneumatic actuator:0.6MPa
6. Maximum storage capacity of powder feeding barrel 60KG
7. Drying channel specification 13000×2300×2200mm
8. Temperature control range: 100-250C
9. Hanging conveying mode
10. Chain speed:1.0～2.0m/min (adjustable)
Indoor environmental requirements during spraying:
1. Normal temperature
2. Wind speed: 0.4 ~ 0.6m/s
3. llumination: >400Lx
4. Recovery rate of powder: >95%
5. Noise: less than 80db
System configuration:
Automatic powder spraying device 2 sets
Automatic spraying station 2 sets
Filter cartridge recovery system 2 sets
Heating chamber 1 set
Fuel furnace 1 set
Overhead chain conveyor 1 set
Electric control system 1 set
Integrated sieve feeding powder bucket 5 sets
The automatic dust blowing system uses compressed air to blow dust, and uses centrifugal fan to remove the dust outdoors:
Technology parameters:
1. System chamber measurement:25000×1600×2000mm
2. Power:380V/50HZ
3. High voltage generator,power 220V,output voltage is 0~100 KV, and the maximum output current is 200A
4. Powder recycling mode is filter pulse recovery
5. Pressure of pneumatic actuator:0.6MPa
6. Maximum storage capacity of powder feeding barrel 60KG
7. Drying channel specification 13000×2300×2200mm
8. Temperature control range: 100-250C
9. Hanging conveying mode
10. Chain speed:1.0～2.0m/min (adjustable)
Indoor environmental requirements during spraying:
1. Normal temperature
2. Wind speed: 0.4 ~ 0.6m/s
3. llumination: >400Lx
4. Recovery rate of powder: >95%
5. Noise: less than 80db
System configuration:
Automatic powder spraying device 2 sets
Automatic spraying station 2 sets
Filter cartridge recovery system 2 sets
Heating chamber 1 set
Fuel furnace 1 set
Overhead chain conveyor 1 set
Electric control system 1 set
Integrated sieve feeding powder bucket 5 sets
What Service Do We Provide?
Pre-sales Service: Customized design of the overall production line scheme according
to customer site, environment, output, budget, and product
requirements
On-sale Service: Tracking the manufacturing progress of the whole line of
equipment, quality control, product proofing and trial production
After-Sales Service: Equipment installation, testing, training, project acceptance
Maintenance Service: Regular inspection and maintenance of the entire line, providing
genuine accessories, 24-hour online service
FAQ
Q: What size of LPG cylinder your machine can produce?
A: 6kg, 12kg,15kgs and 50kgs LPG cylinder for cooking and other
size according customers' requirement.
Q: Can you design machines according LPG cylinder technical
drawing?
A: Sure, please send your technical drawing to us.
Q: What are the benefits to choose your machines?
A: Our machines are strong and reliable for long term industrial
manufacturing
We need to know following information to quote you correct
machines:
1. Technical Drawing of the cylinders you want to make?
2. What size of cylinder you want to produce?(such as 6kg, 12kg)
3. What diameter and thickness of the cylinder you want to make?
4. Are you new in this area or you already have some machines in
the workshop?
5. Capacity you require, i.e. how many pieces and sizes you want to
make per day?
100-250C LPG Straight Tunnel Powder Coating Oven For Powder Coating Line
Inquiry Cart
0