ASTM B 777 Metal Tungsten Heavy Alloy Sintering Parts High Density
Model Number:Tungsten Heavy Alloy
Minimum Order Quantity:Negotiate
Delivery Time:30 days after receiving down payment
Payment Terms:L/C, D/A, D/P, T/T
Price:Negitionable
Supply Ability:10000sets/month
Contact Now
Add to Cart
Verified Supplier
Location:
Luoyang China
Address:
Luoyang National University Science and Technology Park
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
ASTM B 777 Tungsten Heavy Alloy Sintering Parts
Introduction
The density of tungsten heavy alloy is very high. Its density is twice of steel. It is massively applied to balancing weight mold, counterweight, and high-temperature molds.
Tungsten heavy alloy has low thermal coefficient but it has high absorption ability and high-energy rays. It also can also be made into a protective shield and high-energy rays as parts of military defense.
Feature
1. High density
2. High wear-resistant
3. High thermal conductivity with low thermal expansion coefficient
4. High vibration-damping capacity and high Young's modulus
5. High oxidation resistance and corrosion resistance
Parameters
AMS-T-21014 | Class 1 | Class 2 | Class 3 | Class 4 |
Composition | 90W7Ni3Fe | 92W5Ni3Fe | 95W3Ni2Fe | 97W2Ni1Fe |
Density (g/cm3) | 17.1±0.15 | 17.50±0.15 | 18.10±0.15 | 18.50±0.15 |
Heat Treatment | Sintering | Sintering | Sintering | Sintering |
Tensile Strength (Mpa) | 900-1000 | 900-1000 | 920-1100 | 920-1100 |
Elongation (%) | 18-29 | 16-26 | 10-22 | 6-13 |
Hardness (HRC) | 24-28 | 25-29 | 27-32 | 28-36 |
Mil-T-21014 | Class1 | Class2 |
Composition | 90%W, 6%Ni4%Cu | 95%W, 3.5%Ni 1.5% Cu |
Density (gm/cc; lbs/in3) | 17;0.614 | 18;0.65 |
Hardness (RC) | 24 | 27 |
Ultimate Tensile Strength (PSI) | 110,000 | 110,000 |
Yield Strength, 2% Offset (PSI) | 80,000 | 85,000 |
Elongation (% In 1“) | 6 | 7 |
Proportional Elastic Limit (PSI) | 45,000 | 45,000 |
ASTM B 777 Metal Tungsten Heavy Alloy Sintering Parts High Density
Inquiry Cart
0