GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer

GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer Rotary Drum Dryer Introduction:

Working principle: Wet raw material is transported into the dryer by belt conveyor or bucket elevator, because the cylinder is in inclined state for slow rotary movement, so the material in the axial direction from high to low-end movement, in the process of movement, the lifting plate continuously raises, scatters and moves down the material in the cylinder, thus making the material and the high-temperature flue gas carry on the full heat exchange until the drying reaches the specified requirements, the dried material is discharged from the output by discharging device. The waste gas from the dryer end will be discharged by cyclone.

GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer is combined with heating furnace, input port, rotating cylinder, delivery pipe, dust collector and output port. Wet materials are continuously sent to the drying cylinder by a conveyor. Heat air full contact with the material sucked by fan blower installed in the end of dryer. Being transported and scattered by the high-speed hot air, water in the raw material is evaporated and discharged by cyclone. The material gets fully dried in the rotating cylinder.

The GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer is provided with a circumferential lifting plate combination device at various angles inside the cylinder body, which can greatly increase the heat exchange rate and shorten the drying time, can be widely used in river sand, slime, bauxite, clay, slag, fly ash and other materials drying.

GHG dryer is widely used in industries like biomass fuel, wood pellet fuel, sawdust briquette, farming etc. The applicable materials are wood powder, wood shavings, sawdust, wood chips, straws, grass, etc.

The drying body of industrial rotary dryer is composed of cylinder body, ring gear and rolling ring. The drying body is on the tug rolling device and block rolling device supported by front and back rolling ring. It can control axial direction traversing of drying body by adjusting tug rolling device and block rolling device. The driving device drives drying body rotating through the ring gear. Electric motor (frequent) as the power can achieve stepless speed adjusting and meet the demand of different rotating speed.

GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer model for reference:

OUR SERVIC for GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
Pre-sale service GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
1. Expertise and experience of our team help each client to select their most suitable pellet machine.

2. Legal logo printing or design are available.
3. Quality + Good Price + Quick Response + Reliable Service is what we are doing best to offer you.

After you choose GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer:
1. Your machine order can be arranged to produce at the first time.
2. Empty loading running test once machine finished production.
3. Every equipment will be checked carefully before packing, take photos and video to you for confirmation.
4. Shipment booking service is supported.

5. Supervise the whole process of loading.

6. Customs clearance documents will be supplied in time.

After-sale service GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
1. 24hours on-line service, guide you to install and operate the machines your ordered.
2. Video communication guide your local workers doing installation, commissioning and normal maintenance.
3. Engineer technician can be available to your factory to on-site guide installation, training for biomass pellet machine line and other big machines.
4. Spare parts and accessories will be supplied with good price and delivered in 7 working days.
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer FAQ
Q. What is your payment term GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: T/T 30% down payment, balance to be paid before shipment.

Q: What is your main market GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia

Q: What is your delivery time GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: Unit pellet machine can be done well within 10 working days. Complete line will be done with 15-50 working days, the specific time depends on the amount of equipment you purchased.

Q: What documents you can offer GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.

Q: If machine have some quality problem, your solutions GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: If finally confirm our side machine quality problem within guarantee time, we will responsible for it. Change all the parts for free.

Wood sawdust dryer delivery

Wood sawdust dryer installation

Shandong Jinzhao Machine Co., Ltd is one professional manufacturer of wood pellet machine,wood sawdust dryer, hammer mill, pellet cooler and belt conveyors etc. Completely wood pellet line can be supplied well.

Jinzhao boss, after-sales manager have 13 years experience in the field of pellet machine.

Director of production have 15 years experience in machine field.

Technician engineers have 10 years experience of on-site guiding installation of pellet production line and training workers.

Welders, common workers all have at least 5 years experience.

Jinzhao always insist professional things must be done by Professional factories, in order to supply the best solution machine to our customers, we select professional manufacturers of Wood chipper, pellet packing machine to cooperate.
R&D department of Jinzhao help upgrade our machine to meet your need more well.

The Standard parts of our machines like motors, gears, bearing are all well-know brand.

Jinzhao service is divided into pre-sale service, Production service, Delivery service, After-sales service.

Pre-sale service
1.Sales manager confirm details of your need.

2. Expertise and experience of our team help you to select the most suitable machine based on your need.

3. For completely pellet line, our cartographic engineer will design the line based on your factory layout.

4. All details confirmed well, contract will be sent to you.
Production service:
1. Your machine can be arranged to produce at the first time once receive your prepayment.

2.Production time for pellet machine is about 5-7 working days. Follow up production progress each day.

3.Empty loading running test once machine finished production.

4.Each equipment will be checked carefully before packing, take photos and video for you.
Delivery service:

1. Shipment booking service is supported if you need.

2. Supervise the whole process of loading.

3. Customs clearance documents, certificate of origin will be supplied in time.

After-sale service
1. 24hours on-line service, guide you to install and operate the machines that you ordered.
2. Video communication guide your local workers doing installation, commissioning and normal maintenance.
3. Engineer technician can be available to your factory to on-site guide installation, training for biomass pellet machine line and other big machines.
4. Spare parts and accessories will be supplied with good price and delivered in 7 working days.

Quality + Good Price + Quick Response + Reliable After-sales Service is what we are doing best to offer you.

The quality of products is the foundation of the existence of an enterprise; good faith management is the key to the long-term development of an enterprise.

Choose us, win-win cooperation.