Multi Pulse Working Mode IPL SH Machine With Input Power 50/60HZ Laser Hair Removal
Brand Name:GOMECY
Certification:CE ISO
Model Number:GMS single ipl
Minimum Order Quantity:1
Delivery Time:5 days
Payment Terms:T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing China
Address:
Block A, 1/F Jinri Science Park, No. 26 Jinyuan Road, Daxing District,Beijing, China
Supplier`s last login times:
within 29 hours
Product Details
Company Profile
Product Details
Product Description:
2024 GOMECY Faery Multi-Pulse Working Mode IPL SH Machine with Input Power 50/60HZ most effective laser hair removal
1. Hair growth cycle:
Growth period, transition period, rest period. The growth cycle is
about 28-42 days.
2. Principle of hair removal:
The hair shaft absorbs energy and transmits energy to the dermal
papilla. The dermal papilla provides nutrients for hair growth. Its
main component is protein, which will solidify when heated. It
cannot continue to provide the nutrients needed for hair growth,
and the hair will
wither and fall off. (The one that grows outside the skin is called
the hair shaft, the bottom of the hair shaft is the dermal papilla,
and the growth environment is the hair follicle)
3. Course formulation:
Do it once every 28-45 days, 3-5 times a course to achieve
permanent hair reduction. (If the hair no longer grows after doing
it two or three times, don't do it again, and wait until the hair
grows out before doing the operation)
4. Clinical status:
8-10 times of fixed-point operation for lip hair and hairline
operation, and 15-20 times of sliding on large parts of the body
(the number of times is for reference only, depending on the
clinical status). The skin is slightly red, there are protruding
hair follicles, there is a warm feeling under the skin when you
press your fingers, and if the hair is not shaved too cleanly,there
is a smell of burnt hair, one or two clinical reactions are enough.
5. Post-operative care:
1) The hair removal area should not be exposed to water within 4-6
hours.
2) Pay attention to sun protection.
3) No sweating, no soaking in hot springs within a week.
4) Appropriate taboos (spicy, stimulating food, tobacco and
alcohol).
Product details:
1. Principle of skin rejuvenation:
Using the principle of biological thermal stimulation, it promotes
the metabolism of the skin, enhances the circulation function of
blood vessels, makes the skin white and tender, and at the same
time leads to the activation and proliferation of fibroblasts,
stimulates the formation of new collagen, effectively enhances skin
elasticity, and achieves a firmness.
2. Course formulation:
Do it once every 30 days, 5 times a course of treatment, and the
course of treatment is two months apart.
3. Clinical status:
The whole face is operated 3-4 times, till the skin is slightly
red, and it is normal for some customers not to have red skin. (It
is normal for there to be a slight tingling in places with spots
and moles because there is a lot of light absorption) Body
rejuvenation slide 10-20 times, the skin is slightly red.(The
number of times is for reference only).
Technical Parameters:
| Specifications | Values |
|---|---|
| Cooling system | Continuously Stand-by Working For 15 Hours |
| Functions | 1. Permanent Hair Removal 2. Skin Rejuvenation 3. Reduction Of Pigmented Lesions 4. Wrinkle Removal 5. Acne Therapy 6. Freckle, Vascular Lesions And Facial Blemish Removal |
| Display | 10.4 Inch TFT Screen |
| Spot size | 10*41mm, 7mm, 10*10mm |
| Wavelength | 430nm, 530nm, 560nm, 590nm, 640nm, 755nm, Two Small Part Filters |
| Specification | IPL SH Skin Rejuvenation |
| Package size | 66*51*55cm |
| Input power | 90-130V, 50/60HZ Or 200-260V, 50HZ |
| Gross Weight | 45kg |
| Working Mode | Multi-Pulse, Single-Pulse Mode, SHR Working |
Applications:
Freckle Removal
1. The principle of freckle removal:
The intense pulsed light of a specific wavelength acts on the skin
and is selectively absorbed by the melanin in the diseased tissue
(the content of melanin in the diseased tissue is much higher than
that in the normal tissue). With the excretion of the lymphatic
system, part of the epidermal pigment deepens, under the action of
light and heat, the spot pigment undergoes thermal coagulation,
falls off with the skin metabolism, and the pigmentation
disappears; normal skin absorbs less light energy and uses
epidermal cooling technology, so normal
tissue does not be damaged. Mainly for epidermal spots have a
better effect.
2. Course of treatment formulation:
Do it once every 30 days, 3-4 times as a course of treatment.
Afterwards, you can do skin rejuvenation and maintain the skin.
3. Clinical status:
The first full face operation, and then fixed-point operation 5-6
times on the spot. (The number of times is for reference only,
depending on the clinical status).To make the spot color deepen and
increase, it is best to have a sense of floating. (If you have just
started the operation and do not have experience, it is recommended
to treat careful, don't do too much treatment)
6) It is forbidden to use keratin peeling products such as
tretinoin and fruit acid.
4. Post-operative care:
1) Apply vitamin B5 repair gel for 30-40 minutes after surgery
(instant heat dissipation and redness reduction, otherwise may
cause blisters).
2) Before the scab falls off, replenish and repair a lot with
vitamin B5 repair gel twice a day.
3) If there is a scab, do not wash your face with raw water before
the scab is removed, do not use facial cleanser, do not use
cosmetics, wipe your face with normal saline or distilled water.
4) Avoid some food within a week, eat less food with dark pigments
(soy sauce, coffee, etc.),eat less food containing photosensitive
factors (lemon, spinach, etc.), and eat less spicy or stimulating
seafood.
5) Pay attention to sun protection and do not expose to the sun
during the course of treatment (such as sunbathing, rafting, etc.).
6) It is forbidden to use keratin peeling products such as
tretinoin and fruit acid.
After-sales service:
1. One year warranty, if there any problems happens with your
machine, we will repair it free of charge.
2. Convenient training, user manual and operation video are
available, also, if it is not enough, we can provide the online
face to face training.
3. OEM/ODM services, your logo, outshape, language, interface can
specially be designed on your machine.
4. After sales service, offer 7*24 hours online service, lifetime
free maintainance, technology support forever.
5. Products all be assures safe, no broken, and packed with alumium
flight case.
6. Highly reccomand by DHL shipping, our company enjoyed VIP
shipping service, all we quoted are the favorable price, and goods
will arrive your country within 2-4 working days.
Packing and Shipping:
FAQ:
1) What is the difference between DPL and IPL?
DPL uses more precise narrow-spectrum light for skin rejuvenation
treatment, and the photothermal selectivity is greatly improved.
Compared with traditional photorejuvenation, the main feature of
DPL is precision. The treatment cycle can be greatly shortened.
Traditional photons are originally composed of light of multiple
wavelengths, generally in the 500-1200nm band. The energy of these
lights cannot be concentrated, and the effect will be greatly
weakened. The DPL band is between 500-600 nm, and the energy is
concentrated, so the effect will be greatly improved.
2) Who is suitable for DPL photorejuvenation?
People with facial stains/People with red blood lines on the
face/People suffering from photoaging/People who want to improve
their skin quality
3) Will picosecond treatment be painful?
During the treatment process, there will be a tingling and hot
feeling, which will be more obvious in areas with more pigment
distribution, but it will be very fast and will be over in 5-10
minutes, and the pain is completely bearable.
4) Will I become anti-black after doing Picosecond?
Some people will have anti-darkness, but the time is only 3-7 days,
because after the melanin is exploded in picoseconds, it is
metabolized from the basal layer to the epidermis of the skin, and
the more anti-dark the skin is, the better the effect is. This
shows that the pigment of the basal layer is The extraction is very
thorough.
5) Is it enough to remove freckles in just one picosecond?
Freckle removal in seconds generally requires about 1 to 5
treatments clinically, with an interval of about 1-2 months between
each two treatments. The number of times of Picosecond freckle
removal is mainly related to two factors:
1) Different skin types and different types of spots require
different Picoseconds treatment times. The number of treatment
times is also different for those with large and dark spots.
2) The energy adjustment of the picosecond instrument will also be
different whether it uses a honeycomb head or not.
Multi Pulse Working Mode IPL SH Machine With Input Power 50/60HZ Laser Hair Removal
Inquiry Cart
0